Search found 1890 matches
- Tue Apr 09, 2024 8:15 pm
- Forum: 907IE
- Topic: Front Tire Change
- Replies: 4
- Views: 177
Re: Front Tire Change
- Mon Apr 08, 2024 5:15 am
- Forum: Off-topic
- Topic: four candles
- Replies: 0
- Views: 257
- Sun Apr 07, 2024 1:18 am
- Forum: 907IE
- Topic: Front Tire Change
- Replies: 4
- Views: 177
Re: Front Tire Change
I use the centre stand and put some weight on the back of the seat to lift front off ground . You could put the car jack under the front of the motor too.( I used to sit it under the front header pipe . I never had an issue but its the old story ... wouldn't recommend it and don't tell anybody I did...
- Thu Mar 28, 2024 7:22 pm
- Forum: 750 Paso
- Topic: Fuel tank fitment
- Replies: 5
- Views: 612
Re: Fuel tank fitment
To get the position right Id probly mock the whole thing up ( with headlight fitted )with the tank just sitting on the mount and get everything sitting as you want it and then tack it with a mig welder . When I did mine I didnt bother fixing the cracks ,I just welded right round the edge of the patc...
- Tue Mar 26, 2024 7:10 am
- Forum: 750 Paso
- Topic: Fuel tank fitment
- Replies: 5
- Views: 612
Re: Fuel tank fitment
Mine too , I cut the mount right off , beat into shape and welded in a bit of 1/8th steel plate about 4 inches square ( cant remember exactly what size it was ) , trimmed the 1/8th off the mount and welded it back on . The whole weight of the fairing and 1/2 the tank hangs offa that mount.
- Sat Feb 10, 2024 6:11 am
- Forum: 750 Sport and 900SS
- Topic: 1989 750 Sport idle issue
- Replies: 34
- Views: 22559
Re: 1989 750 Sport idle issue
There are post on here re the vacuum pump and fitting thereof .
Pleased to here p750 is going well now ......fingers crossed![:) :)](./images/smilies/smiley.gif)
Pleased to here p750 is going well now ......fingers crossed
![:) :)](./images/smilies/smiley.gif)
- Fri Feb 09, 2024 9:38 am
- Forum: 750 Sport and 900SS
- Topic: 1989 750 Sport idle issue
- Replies: 34
- Views: 22559
Re: 1989 750 Sport idle issue
some of that cheap stuff aint so bad .What I do is measure the same thing a few times and if the reading is the same each time ( and resets to zero if applicable ) Id call is a duck ( walks like a duck , quacks like a duck.........its a duck :P ). one psi aint a lot .... Id want to see 3psi , perhap...
- Thu Feb 08, 2024 8:37 pm
- Forum: 750 Sport and 900SS
- Topic: 1989 750 Sport idle issue
- Replies: 34
- Views: 22559
Re: 1989 750 Sport idle issue
I have a notion that an injected pump would poke out about 60 psi and if that was hooked to the weber .... return line or not , the carb would look like a fountain ![:lol: :lol:](./images/smilies/grin.gif)
![:lol: :lol:](./images/smilies/grin.gif)
- Thu Feb 08, 2024 7:43 am
- Forum: 750 Sport and 900SS
- Topic: 1989 750 Sport idle issue
- Replies: 34
- Views: 22559
Re: 1989 750 Sport idle issue
the stock pump is ok . There should be a T in the fuel line at the carb , one line off the T goes to the carb , the other is a return line to the tank ( should be 3-4mm id). The length of the return line determines the restriction of the return line . Basically the longer the return line the higher ...
- Tue Feb 06, 2024 2:26 am
- Forum: 750 Paso
- Topic: Akront/Marvic wheels
- Replies: 6
- Views: 636
Re: Akront/Marvic wheels
Me and Di have a similar arrangement, except that I dont need to ask ..... coz they show up on my #king credit card ![:lol: :lol:](./images/smilies/grin.gif)
![:lol: :lol:](./images/smilies/grin.gif)
- Tue Jan 23, 2024 8:04 pm
- Forum: 750 Sport and 900SS
- Topic: 1989 750 Sport idle issue
- Replies: 34
- Views: 22559
Re: 1989 750 Sport idle issue
The brass float I refer to is a genuine weber part . I dunno if the plastic float supersedes the brass one but both were available . Good point about the alcohol and brass there Higgy :) ( I had to think for a bit :lol: ) I do have some old brass shit , miners lamps old ammo etc , and a lot of it ha...
- Sun Jan 21, 2024 6:42 pm
- Forum: 750 Sport and 900SS
- Topic: 1989 750 Sport idle issue
- Replies: 34
- Views: 22559
Re: 1989 750 Sport idle issue
I handed it over to a local technician at https://www.thornburycarburettors.com.au family owned and doing this type of work since the 1960's. I briefed him on the issue\leak and he's going to bench test and find the issue before proceeding with a fix \ service. They're a good source for parts too. ...
- Fri Jan 19, 2024 9:39 pm
- Forum: 750 Sport and 900SS
- Topic: 1989 750 Sport idle issue
- Replies: 34
- Views: 22559
Re: 1989 750 Sport idle issue
wouldnt be the 1st weber Ive seen with a crook float . The black plastic float in my Capri ( 32/36 dgav ) took on fuel and was a real bother to sort . Wasnt untill I parked the car facing steep uphill and I couldnt start it at all.....I could see fuel welling up out of the air correctors and straigh...
- Wed Jan 17, 2024 6:35 pm
- Forum: 750 Paso
- Topic: Paso 750 manifold - header pipes question
- Replies: 7
- Views: 1025
Re: Paso 750 manifold - header pipes question
Im thinkin that the rear header is narrower because its longer , so as the two headers have the same internal volume . The mis match of the rear header and junction is because there is a gasket/sleeve thing that goes in there too ?
- Mon Jan 15, 2024 5:30 pm
- Forum: Idle Noise
- Topic: What have you done today?
- Replies: 8
- Views: 13319
Re: What have you done today?
![:lol: :lol:](./images/smilies/grin.gif)