Finally managed to submit Photos

[/img]:lol: Just waiting for its return. Can't wait to get it refitted, feel like a dog with two tails :D Will post result after refitting and test. :beer: I finally managed to post photos. I had my tank repaired at:-Henderson Plastics Ltd, Lyng Hall Road, Wood Norton, Dereham, Norfolk, NR20 5BJ, 01...

Had a similar fault, bike would turn over but not start. My Problem was with the two relays with the blade fuses in them, next to the flasher relay. At some point one of the fuses must have been replaced, but it was a poor fit as it was a slightly different size, so when the bike was running the vib...

Hi Keith,
Seems a bit low, mines on the road and i know of another in my region.
But the other may not be on the road.

Regards

Gerry

Just like to thank you guys as i have suffered with this light problem as well.

Special thanks to Derek for his explanation which after some head scratching enabled me to do the mod.

No more blinking in sympathy with the indicators :-)



Cheers

Gerry

Ed, Had a similar problem with relays, turned out to be the fuse carrier in the relay was a loose fit, intermittent not firing,see this link, there are pictures of relays, maybe they are the same ! I got mine from Ducati dealer here in scotland. Gerry http://forums.ducatipaso.org/viewtopic.php?f=3&a...

Thanks Guys,
Just the information I needed, will attempt to remove the seal by the screw method

Regards

Bomber

http://i709.photobucket.com/albums/ww96/Bomber1959/IMG_9768.jpg http://i709.photobucket.com/albums/ww96/Bomber1959/IMG_9767.jpg http://i709.photobucket.com/albums/ww96/Bomber1959/IMG_9769.jpg This is a picture of the shaft that the two cam belt pulleys are on.(92 907IE) Does any one know if the rou...

Here are some pictures, (if i manage to post them), of my labours ! http://i709.photobucket.com/albums/ww96/Bomber1959/Reg%20Rec/IMG_9292.jpg Top Wiew http://i709.photobucket.com/albums/ww96/Bomber1959/Reg%20Rec/IMG_9293.jpg Fan Clamp made from old heatsink Fin http://i709.photobucket.com/albums/ww9...

Thanks Guys, :thumbup: all your info is exactly what i was looking for. I have taken it all on board and the fan is fitted, the wiring was replaced on previous RR replacement, and is heavy duty multicore. I have used large bullet crimps on the cable ends, then solderd the connectors as well, then co...

On my 3rd Electrex RR51 in 3 years ! :shock: Have used most of the tips posted here, thermal paste, new wiring, even fitted an aditional heat sink, but still failure of RR. Have good earths etc. Was thinking of the additional Earth wire ? Has anyone fitted a small PC cooling fan on top of the RR ? I...

Great info,
Now I understand, I can have pads with springs, or without, and a seperate Spring !
Thanks to all for your quick replies.

Gerry

Thanks Guys,

I will now need to find myself some springs !

Cheers

Gerry

Hi to All, Front brake pads on my 92 907IE rattle, like a bag of nails ! Had the bike MOT d here in the uk and the tester thought there was something missing from the Gold coloured front Brembo Calipers.!! Anyone out there know if there should be anti rattle springs(not sure if thats what they are c...

Had a very similar problem, bike would crank, no spark etc. Even when the bike was warm and had been running fine, suddenly just cranking but would not start. My fault was caused by one of the 2 injector relays,the ones with fuses ! A previous owner or mechanic had replaced a fuse in the relay, but ...