So it sounds like there is a short in your ignition switch or wiring or the fuel pump relay has a short in its wiring. Or the typical loose or bad ground is feeding back through one harness or the other Tested this again last night and it do not started the fuel Pump!!! I had the ideia that it did ...

This is how i conected the relay. Sense Wire only get +12v when ignition Key is ON, that Will switch the relay and give the correct +12v to rectifier. The only Diference is i conected the +12v (BAT in drawing) to the starter solenoid +12v feed. PS: I did not cut any original wiring. https://iili.io/...

MC tool

If you Wire directly from battery +12v it Will Turn on other parts (fuel Pump etc...) and you end up with a dead battery.

I have tried that first, thats the reason i used a relay it Will only give 12v to rectifier when you Turn on the ignition Key.

After have bought a new rectifier and it still overcharge i found that the original rectifier have a Sense Wire (it reads the battery voltage from the harness that comes from the ignition Key switch) I cleaned all earth and conections also disasemble ignition switch and cleaned all. But after this p...

This parts has no bolts in that place, there is some plastic plug that fits in a rubber grommet in the lower gas tank.

I have one that i bought by mistake from ebay, if your intersted send me PM.

"But if big scooters have 15" wheels, i always have a believe that in near future some maker will adopt 16" in their line of scooters, its not the case yet..." A Suzuki Bergman 650 has 16" wheels as well as a Aprilla Scooter. Pirelli makes a 140/70 r16 Diablo for them. Not ...

good news!

But if big scooters have 15" wheels, i always have a believe that in near future some maker will adopt 16" in their line of scooters, its not the case yet...

But its very good news and we all can keep the paso with wright tires!

humm to bad....

thanks, hope it will be online soon!

I can not acess to the gallery area, put user name and pass but it does not work....

I remenber that before i had acess, but not anymore, what can i do?

Thanks

Hi, do you have the ignition lock with keys???

The steering lock only have two hex bolts, just lose them and the lock will come out, disconect the wiring under the headlight and remove the lock.

thanks, persempre907

but more pictures is always better...

(One picture worth a thousand words)

hi, nojapan, can you post more close pictures from the other decals on the bike to see their quality?

Are those the one sold in ebay?

thanks, jorge