Hello G, Just seen your Q. https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F142449324398 The gold one screws straight onto the drive. Done quite a few 1000 miles and it still works. My speedo now reads about 5-10% slow so I have to be careful past cameras. The blue ...

Decent file. Checked it with vernier to get it right. I bought a batch of copper washers to substitute for drive to mock up and work out reqd width.

I put showa’s on my 907 with a later 3spoke wheel w 25mm spindle. I took 2mm off the outside edge of the new type speedo drive to centre the wheel w no problems. Also the gearing was +50% reading fast. I put a mechanical km converter at the drive that almost corrects it.

CG 125 brushes fit with a couple of minutes filing.

https://www.facebook.com/BikeShedMotorc ... 510227762/

Is this one of ours?

Just taken mine off the road for a bit while I scare myself on my 999.

RIP Boyd.

Ive got a set but in uk so costly to post?

There was a guy from germany on here bock900R that put a ST4 motor and single sided arm in a 907 and finished it but we didnt get a road test report.http://forums.ducatipaso.org/viewtopic. ... 9&start=60 . Also JoKing on here put a ST3 motor in 907.

Merry Christmas all.
Cheers, Keith.

There is a variation in 907 tanks. I have seen one with a single breather while most have 2.

Theres fllasher relays on ebay with adjustable flash rate for about £3 from china. It goes from flash per sec to strobe.I have one on my SSie with aftermarket indicators and its working fine but I've only had it a month. The 2 outer spade connectors were wrong way round so I had to make a sub loom r...

You can use a variety of front sprockets by making a spacer to fit on the outside of the sprocket to get correct offset. I cut a 5mm(i think) piece of dural the same shape as the securing ring with large hole in middle and two holes either side for the bolts. I now use SS sprockets with zero outer s...

Rogers beard is camera shy i think. No images available at this time.

Saw you had Harley and beard Roger.
I'm a bit concerned.