Search found 20 matches
- Sat Aug 12, 2023 8:29 pm
- Forum: 907IE
- Topic: Overheating
- Replies: 1
- Views: 4747
Overheating
Hi fellow members I have had my 91- 907 for 25 years now and I took it to get the starter clutch replaced at my local Ducati whisperer. The starter is all fine now but it now overheats. I have replaced the thermostato ( ha ha ) and it is still overheating. I was wondering if when he had the cases ap...
- Sun Aug 28, 2022 6:37 pm
- Forum: Aiming for the Apex
- Topic: LONG HAUL
- Replies: 3
- Views: 7501
Re: LONG HAUL
Yeah. Lots of winding roads here and in the US. and some states have high speed limits ! I joined the local Ducati club here about 15 years ago and alls they would do was meet up at an Italian coffee shop and watch the girls go by They didnt want to put too many kms on there bikes I had an 851 at th...
- Thu Jun 30, 2022 12:59 am
- Forum: 907IE
- Topic: leaking forks
- Replies: 1
- Views: 5688
leaking forks
fellow riders. my forks are leaking badly. i had them complety rebuilt about six years ago so not as long as i hoped them to last the bike has 148000 kms on it does anyone know about putting 900 ss seals on a 91 907 marzoochi fork dont really want to drop another two thousand or so then have the sam...
- Thu Jun 09, 2022 2:47 am
- Forum: Aiming for the Apex
- Topic: LONG HAUL
- Replies: 3
- Views: 7501
LONG HAUL
LONG HAUL Post by Bonza » Sun Jun 05, 2022 6:05 pm hi everyone. just got back from another epic ride on the ole duc 5500 ks in 9 days hit 7 states and 1 province had a few dramas in the cold of the mountains had to bump start it in the morning for the first 3 days had 2 puntures as well. but it sure...
- Tue Aug 28, 2018 12:44 am
- Forum: for sale / for trade / want to buy
- Topic: 907ie parts
- Replies: 3
- Views: 3586
Re: 907ie parts
i just bought it back from the insurance company today $816.00 will have rebuilt status earlier they said i couldnt buy it back so i went out and got myself a 2017 fz09 iguess ill ride that for now the bike was parked when it got hit one of my work mates did it thanks for the kind regards Terry
- Sun Aug 26, 2018 6:18 pm
- Forum: for sale / for trade / want to buy
- Topic: 907ie parts
- Replies: 3
- Views: 3586
907ie parts
my 907 was written off last week bummer i owned it for 18 years i have afew parts left a thermostat alefthand front indicator lens and the lower 907ie decal the parts are new ialso have the owners manual but it is preety ugly cheers terry
- Sun Feb 18, 2018 1:29 am
- Forum: 907IE
- Topic: 300mm upgrade
- Replies: 3
- Views: 5165
300mm upgrade
hello 907 riders im looking to improve the brakes on the old chook ithink ductile steel would suffice if anyone knows where i can get any or any other ideas would be helpful i just finished an 8 year love affair with an 851 which had 320mm floating rotors those brakes were so powerful so im hoping j...
- Thu Oct 26, 2017 2:28 am
- Forum: for sale / for trade / want to buy
- Topic: 907ie Left Front Body Panels
- Replies: 7
- Views: 6981
Re: 907ie Left Front Body Panels
i have an original 907ie decal ; welcome to it if its any help
- Tue May 31, 2016 3:52 am
- Forum: 907IE
- Topic: Yesterday was not a good day
- Replies: 13
- Views: 9460
Re: Yesterday was not a good day
Hi Derek
I have the 907 ie decal. Your welcome to it if thats any help.
I have the 907 ie decal. Your welcome to it if thats any help.
- Thu May 26, 2016 3:44 am
- Forum: 907IE
- Topic: Yesterday was not a good day
- Replies: 13
- Views: 9460
Re: Yesterday was not a good day
Sorry to hear about your mishap. If its any help jeep has a new colour called firecracker code PRC which is a near spot on match its only on the wranglers so far, so if you see one around compare it.
Cheers
Bonza
Cheers
Bonza
- Thu May 05, 2016 12:27 am
- Forum: for sale / for trade / want to buy
- Topic: Paso front indicator glas wanted
- Replies: 7
- Views: 5517
Re: Paso front indicator glas wanted
Hi Isak65.
I sent the indicator lens yesterday. It should take 1 week to 10 days. Even though I said it was used, it is only a couple of years old and looks like the new one I am about to install. Hopefully it comes in one piece
Cheers
Bonza
I sent the indicator lens yesterday. It should take 1 week to 10 days. Even though I said it was used, it is only a couple of years old and looks like the new one I am about to install. Hopefully it comes in one piece
Cheers
Bonza
- Sun May 01, 2016 5:28 pm
- Forum: for sale / for trade / want to buy
- Topic: 907- Decal
- Replies: 0
- Views: 7370
907- Decal
G'day me old mates
Through my trials and tribulations I have a 907 decal that goes on the lower fairing. If anyone could use it let me know.
Thanks
Bonza
Through my trials and tribulations I have a 907 decal that goes on the lower fairing. If anyone could use it let me know.
Thanks
Bonza
- Sat Mar 26, 2016 1:37 am
- Forum: 907IE
- Topic: CAM SHAFT ...kaput
- Replies: 10
- Views: 7165
Re: CAM SHAFT ...kaput
hey McTool the shaft is worn down quite a bit the pulley is very sloppy on the shaft where it is the correct diameter the bike still ran but made some wiggy sounds down there with the bagged keyway in you can move the pulley back and forth nearly one tooht of the pulley
- Fri Mar 25, 2016 5:52 pm
- Forum: 907IE
- Topic: CAM SHAFT ...kaput
- Replies: 10
- Views: 7165
Re: CAM SHAFT ...kaput
Hi guys, thanks for all the info. I took the cam and the pulley to a machine shop and they said it's not worth fixing. Both parts are worn badly. Thanks for the advice McTool. Maybe if we were in New Zealand some Kiwi guy could get 'er done. Paso 750 - I'll take up your kind offer. Although I need a...
- Wed Mar 23, 2016 11:48 pm
- Forum: 907IE
- Topic: CAM SHAFT ...kaput
- Replies: 10
- Views: 7165
CAM SHAFT ...kaput
G'day my old mates My cam shaft has bit the dust and I am having a bit of a worry getting a new one or a used one. The part number is 14810121A. If anybody has any ideas on where I can get something to help me out I would greatly appreciate it. I am in Vancouver, Canada. The only thing I have been a...