Search found 20 matches

by katescottageiom
Wed Dec 30, 2015 9:25 pm
Forum: 907IE
Topic: LED headlight bulbs - H4
Replies: 23
Views: 16929

Re: LED headlight bulbs - H4

You might want to go to:
accessnorton.com page two "permanent solution for dim commando headlight
by katescottageiom
Thu Oct 29, 2015 9:48 pm
Forum: 907IE
Topic: 907 fork oil air gap
Replies: 4
Views: 4837

Re: 907 fork oil air gap

Thank you, now if I can find a left hand turn signal assembly maybe I can manage a few rides before the
weather changes.
by katescottageiom
Thu Oct 22, 2015 8:11 pm
Forum: 907IE
Topic: 907 fork oil air gap
Replies: 4
Views: 4837

907 fork oil air gap

What is the correct air gap for the front forks? My 907 owners manual says 160 mm and the workshop manual says 180 mm.
by katescottageiom
Fri Jun 26, 2015 6:11 pm
Forum: 907IE
Topic: Rear turn signal source - stock or euro lens
Replies: 5
Views: 5441

Re: Rear turn signal source - stock or euro lens

fuel leak is probably a rusty tank leak, after sitting up that long, that is why my tank is black!
by katescottageiom
Fri Jun 05, 2015 4:47 pm
Forum: 907IE
Topic: A broken fuel pump....
Replies: 4
Views: 4784

Re: A broken fuel pump....

I tried the plastic mounting ring, clips did not fit into my tank mount properly, refitted my old one.
by katescottageiom
Wed Jun 03, 2015 5:53 pm
Forum: 907IE
Topic: A broken fuel pump....
Replies: 4
Views: 4784

Re: A broken fuel pump....

euromotoelectrics very good and responsive. I have one of their pumps, fits and operates as stock. They respond very quickly to any issues. Purchased my "latest" reg/rec from them about a year ago and is functioning. They have a kit which contains flexible in-tank fuel line which I have in...
by katescottageiom
Fri Apr 10, 2015 5:06 pm
Forum: 907IE
Topic: blue wire out of left side handle bar switch
Replies: 6
Views: 5305

Re: blue wire out of left side handle bar switch

Thank you all, now I can push forward with confidence to the next issue, locating the correct 7mm in tank injection line.
by katescottageiom
Thu Apr 09, 2015 9:51 pm
Forum: 907IE
Topic: blue wire out of left side handle bar switch
Replies: 6
Views: 5305

blue wire out of left side handle bar switch

I can not identify this wire, was connected to frame tube just down from the re/rectifier mount. Is this a ground wire? It is blue not black, and connects into the left side handle bar switch. Diagram does not show it or I just can not see well enough at 68!
by katescottageiom
Sat Nov 10, 2012 4:43 pm
Forum: 907IE
Topic: fuel injection line
Replies: 2
Views: 2571

Re: fuel injection line

Thanks Bertus.
jt
by katescottageiom
Wed Nov 07, 2012 6:35 pm
Forum: 907IE
Topic: fuel injection line
Replies: 2
Views: 2571

fuel injection line

Is the line that runs from the fuel pressure regulator to the tank high or low pressure?
by katescottageiom
Tue Jun 15, 2010 10:56 pm
Forum: 907IE
Topic: ADC 6000 regulator/rectifier vs Ducati new and improved
Replies: 1
Views: 1743

ADC 6000 regulator/rectifier vs Ducati new and improved

I have replaced the reg./rec. four times in 28k miles, this includes the original , and am again facing this never ending issue. I have done the recommended upgrades such as 10 ga. wires from stator to regulator, grounding the regulator case etc. I have used Electro Sport and Electrics units, and ha...
by katescottageiom
Thu Dec 06, 2007 3:35 pm
Forum: 907IE
Topic: FUEL INJECTOR CLEANER: FUEL ADDITIVE
Replies: 11
Views: 5365

Re: FUEL INJECTOR CLEANER: FUEL ADDITIVE

Laddie, a word of caution, the polyester epoxy resin you are referring to is the same product used in Norton Commando glass tanks. The new fuel formulations are destroying these tanks after just a few miles, per the British bike forum, and my first hand experience. One of my customers now has a nos ...
by katescottageiom
Wed Nov 14, 2007 6:36 pm
Forum: 907IE
Topic: Cutting/removing airbox lid?
Replies: 32
Views: 11333

cutting/removing

Antti, I purchase most of my Hella's for about $80.00 a pair which includes mounts and adjusters. This is far bellow retail. They are easy to wire using a 30 amp relay and proper guage wire. The HID is not a H-9, but a Zenon or something, not sure. I know nothing about the ST 2 lighting. I also have...
by katescottageiom
Tue Nov 13, 2007 5:28 pm
Forum: 907IE
Topic: Cutting/removing airbox lid?
Replies: 32
Views: 11333

cutting/removing

Blackduck, Hellas are separate high/low beams, wattage is 65 H-9 bulbs which gives aprox. a 50 percent increase in ilumination, but sure seems to be more actual light on the road. The real trick for 907's would to use the single 90mm HID mod. that contains both the high/low beam, and uses only 35 wa...
by katescottageiom
Fri Nov 09, 2007 3:17 pm
Forum: 907IE
Topic: Cutting/removing airbox lid?
Replies: 32
Views: 11333

cutting/removing airbox lid

Gert, to the left and right of 90mm round Hella modulars inside headlight bracket. Tight fit. Used some racer-boy small air scoops w/home made rock guards. Functional. She is in a state of disassembly at present after encounter with former spousal unit's Oldsmobile, on a cold, wet, dark mountain bac...