Hello. I have been unfortunate enough to get arthritis. It makes me not able to pull the clutch on my motorbike. I'm not going to quit driving MC for this, so I’m looking for an alternative solution. The solution could be a coupling cylinder to drive a servo, a type of cable pulleys to the existing ...

I have ordered this and will try a small modification. I will report back if it works...

Hi.

I have a order pending at them, but they are not able to get it. Have also tried Stein Dinze but no luck.

I will try to look at the other models to see if they could fit - thanks.

Hi.

Can anyone help med with the rubber cover for the belts. It is the one for the horizontal cylinder.

Ducati partnumber : 23510061A

http://www.stein-dinse.biz/Komplettange ... :8598.html

Hi. For info i found all the correct updated SKF number for the main bearings, and bought them at Simply Bearings. The list is : 2 x SKF 6305C3 Open Deep Groove Ball Bearing 25x62x17mm Option's £5.57 £11.14 1 x SKF 7207BEP Single Row Angular Contact Ball Bearing 35x72x17mm Option's £24.62 £24.62 1 x...

thanks for the links. I will try them out....

Yiarkkk - expensive.

I should have bought a new bike instead... :-)

Thanks for your mail. I have seen the list and tried to find one of the bearings I needed from your list - like : 7307 X2TB (main bearing) but it is hard to find. Ebay doesn't give me any hit. I can find some hit but the price is &%¤¤#% It is me ? I was just thinking that the bearing must have a...

Ps.

Split engine : https://www.dropbox.com/s/w32z5ch3iyhvl ... .32.05.jpg

Hi. I renovating my 906 engine with new crankshaft and bearings. Anyone that has the SKF numbers for the bearings or maybe a link to where i can buy them (cheap.....) Any hints regarding engine assembly is recieved with thanks. This is my first Ducati engine.... :wacko: Ps. I have disassembled the e...

I went on the trip and after 200 km the engine stopped and locked.

I think the problem here is in the generator, and this somehow has blocked the stator. The bike is located in a barn in Sweeden right now, but I will come back with some updates as soon as i get it back and examine the engine.

Thomas

I have seen the problem before the seal'ing but both lines are free.

To be sure i didn't seal the top because I was afraid that is would stop the lines so it is ok.

But thanks...

Yes, and I have just sealed the tank inside....

Thanks.

thanks will try that. you will here from me when i return from the trip...

Hi. Some time ago my 906 PASO just stopped. Pulled in and it started again with no problems so i didn't do anything about it, but yesterday it stopped 5 times on 10 km. It just suddenly stops - total dead. One time i was running 120 km/t on the highway and then suddenly no power - total dead.... All...