Starting a business and need all the help i can get.......

https://phoenix.craigslist.org/nph/mcy/ ... 95418.html

Finally after three years the paso is resting on 2 wheels!!!! thank you!!!
now its time to try and fix all this cut up wiring...

been a long time since ive posted, but im in trouble. i left my fork seal job to a friend of mine, and after 2 years...ive picked up the parts but they are all in one box. i need to know which side the short fork tube belongs. i believe i have found enough diagrams for everything else, but still not...

having camera issues... I havent tried any local dealers yet... ok, its completely apart. only 3 broken bolts to deal with. gotta remake the wiring harness and make a chain slider. there is 1 head nut giving me trouble but the other cylinder head is off and doesnt look too bad. (considering it only ...

I just had to ride the $350 paso before it got cold.... Now that its getting cold it's getting torn apart to reseal the engine rebuild the forks, fix the body work, reseal the calipers, etc. the fork clamp bolts were not even close to finger tight on the right side. the chain is so stiff i can use i...

It works!! Finally got to ride the other day. loads of fun. Fuel filters and spark plugs gaped correctly its back on the road!!

still havent been able to get out because of the rain.....
I did decide to read the plugs because i just had to do something, and....WHO GAPPED THESE PLUGS!!! Definetly didnt do that correctly. need to go back to school.

I will let you guys know how it goes as soon as the rain lets up

ok, I pulled the tank and left the line from the tank to the pump hanging on it. (where my filter is). and turned the petcock on.....almost nothing. replaced the filter and its good. I am going to try and go for a ride today to be sure that was all it was.

Thanks for the responses you guys! going to pull the tank and drain it today, check out the filters (screen in the tank, inline, and on the weber) and go from there. im fairly confident its a fuel issue, but i have to put it all back together and ride for a few miles to find out if i have fixed anyt...

not much of a shutter. just dies out. it would not start immediately after pulling over. wait just 2 minutes and it fires right up. i was up all night thinking about it.

going for a ride down the mountain today.... and about 5 miles into the ride the bike shuts down. let it sit for a few minutes, starts again and a few miles go by....shuts down... i know its not vapor lock. i feel like the fuel pump is just shutting off. after it dies and you let it sit for a few mi...

Pretty sure I am going to switch to dellortos.....
thought I would take offers for the running carb (not real well) the intake and k&n set up. will post pictures if needed.

the clutch cover has ribs all inside it that make up for most of the strength, and its really thin between those ribs, so i wasn't too worried about it. as for my clutch problem....i removed the non factory master that was on it and ordered a paso clutch master. there was a lot of gunk in the old on...

Did this in about 45 minutes....
Had to put it here to show how proud I am!!!!

having issues with my clutch...when i got the bike the button in the cover was leaking, so i popped it out and replaced the o-ring. it worked fine, bled the master and it was good. Since then i haven't put 10 miles on it, and now the clutch stays engaged inconsistently when i pull the clutch in. som...