Hi,
The 907 decal is it left or right side? If so, how much do you need for it ?

Rich

Up for sale is my 906 Paso. It's a complete bike that has a wiring issue I believe. I bought it as a salvage bike fixed it and rode it for years, so it has a reconstructed title. It appears to have an electrical problem. The previous owner hacked up the wiring so I bought a used wiring harness that ...

I may be using the wrong words here. My shock has the 2 nuts at the top. There is a sticker that I don't really understand. It looks like settings for 2 and another for 2 people + baggage. The problem is I have osteoarthritius in my hips,shoulder and back. I can't seem to get my feet on the ground q...

Thanks for the speedy reply, my 907ie has the factory shock, does that help ?

Rich

Hello everyone, I bought a 907ie last season to go along with my 906. Problem is I can't flat foot the 907. I believe I can lower it ( I need no more than an inch ) by adjusting the rear shock preload. Am I correct, if so I believe I need to tighten the spring around the shock...... Your expertise o...

Hello everyone, With alot of help from Ducatipaso.org, I finally put new brushes in my starter. It wasn't as bad as I thought,so if you're considering it, don't be intimadated. I bought my parts from the local starter/altenator rebuild shop for $21.76. Here are the part numbers that worked well: 028...

Hello everyone, I am back at it again, trying to make my Paso more reliable and failing miserably :,( I was taking off the rear cylinder coil to clean the ground and the one bolt snapped on its way out. I drilled and tried the trusted easy out,which snapped. :mad: I tried drilling the easy out,with ...

Hello everyone,
Is there supposed to be an off/on switch on my 90 906 Paso? On mine,there is a place for what could be one,but I cant find a yes or no in the microfiche or in the factory service manual,SO I am turning to the experts-YOU Thanks a ton!

I think that badhabrace is onto it. I found that with mine that a drop in voltage will cause the digiplex to temporaraly chunder, like when I switched on the headlights the thing would backfire but recover almost immediately even tho the headlight remained on. Try hot wiring the digiplex by running...

I need advice. Last season I lost spark at the rear cylinder. I replaced the coil,bike ran for about 7 minutes,stalled and hasn't started since. With some tips from Gerhard, I have determined that while attempting to start the bike,voltage drops to 9.74 volts at the Digiplex unit. I have a sneaky id...

Hi everyone, Thanks for the tips concerning my sickly 906. I tool out the pick-up sensor & discovered the previous owner had spliced it. (it must have burned at some point) Now, I can't seem to find instructions to test it. I checked the service manual and internet,no luck. I was going to just r...

HI everyone, I hope you had a great holiday season. Sadly, my 90 906 didn't. At the end of the season last year, the bike started back-firing through the carb and right exhaust. After some back yard diagnostics, I found I had intermittent spark at the one coil. I replaced it,fired it up and all was ...

Hi everyone and Happy 2008! I recently installed a set of 900ss mikunis on my 90 906 paso. I had to construct an air filter set up using 2 K&N air filters. It works, but its probably the most hideous thing you'll ever see! My question for you is what filters have everyone else been using with su...

HI Everyone! Thanks to advice I got from ducatipaso.org,I recently converted my 906 from a tired Weber to a 38mm Mikunis and they are working great! THANKS! My next project (without taking a second mortgage) is upgrading front brake sysytem. I have heard using the 907 front rotors,calipers and maste...

Greetings , I would check at your local Pep Boys..........I believe you can get a fuse holder in the stereo section. If I remember correctly, they have fuses ( large glass style) in with the amplifier wiring section. Let me know how you make out! Ride safe................. Rich