I have one red,good condition
If you like some pictures send me a mail
Search found 19 matches
- Thu Sep 08, 2016 12:19 pm
- Forum: 907IE
- Topic: Having trouble finding rear Tire - Help
- Replies: 3
- Views: 5715
Re: Having trouble finding rear Tire - Help
I run Dunlop,qualifier2,180 on rear,but170 is easy available.
- Mon Aug 29, 2016 10:58 am
- Forum: Events
- Topic: 2016 zeltweg gp
- Replies: 1
- Views: 10309
Re: 2016 zeltweg gp
It is not a coincidence that came a 907 in zeltweg ducati wins race!
Hope Gigi read this.
Hope Gigi read this.
Re: Tires
Thank for replyes My bike paper has originale size and a optional size.optional was writing in 1996 ,for do this you must have a ducati official documentation,calling"nullaosta". Near 180/60 they write 120/60 ,and now i must use this pair or stock pair. When my new Dunlop will be consumed,...
Tires
Hi ,how tires sizes have signed on yours bike documentation? I have170/60/17rear 120/70/17front. Alternatively are 180/55/17rear 120/60/17 front. That size are write on my bike document My bike have 180/55/17 and120/70/17 but local police dont like it because theyr opinion are i must have stock pair...
- Fri Aug 05, 2016 2:37 pm
- Forum: Events
- Topic: 2016 zeltweg gp
- Replies: 1
- Views: 10309
2016 zeltweg gp
My 907is ready (i hope),new tires,new suspension,new engine....old driver.If anyone see a black 907 in zeltweg circuit this August and like talk about our bike(and drink a beer)give here a message or robert kristancic on FB.
- Mon Aug 25, 2014 8:51 am
- Forum: 907IE
- Topic: DIY EFI solutions
- Replies: 1
- Views: 3457
Re: DIY EFI solutions
i work a lot of year with this ecu.about 15 ecu works well on street/race car,using myself made ecu. but i never install one on a ducati. it work well on lancia delta using iaw sensor in full sequential mode,I'd try on my bike. there are some advantage: first,it can trim fuel and spark separately fo...
- Fri Aug 15, 2014 3:36 pm
- Forum: 907IE
- Topic: new member
- Replies: 22
- Views: 19668
Re: new member
i drive it for first 160km
it's a great bike!
this is finally results,hope you like it's italian desing in black dress.
it's a great bike!
this is finally results,hope you like it's italian desing in black dress.
- Fri Aug 15, 2014 3:16 pm
- Forum: 907IE
- Topic: Fuel Pump - 3 second priming was bypassed
- Replies: 10
- Views: 7779
Re: Fuel Pump - 3 second priming was bypassed
have here 907's schematics.puel pump an mae module are connected at the same relais. marelli ecu grounded this relais via pin 28 and it drives pump and coil module(mae) this is a normally connection in every fuel injection sistem. why?because a fuel inj sistem work at 3,3.5 bar and fuel pump must wo...
- Tue Aug 05, 2014 8:23 pm
- Forum: 907IE
- Topic: new member
- Replies: 22
- Views: 19668
Re: new member
dressing
- Sun Jul 27, 2014 3:57 pm
- Forum: 907IE
- Topic: new member
- Replies: 22
- Views: 19668
Re: new member
next week i am ready to paint!
but...what's colour code?
my paint shop create a colour like the stock but dont try the ducati's code colour!anyone have this?
another progress:i change all brakes and cluch tubes line,with a "frentubo"kit.
now cluch come back very fast!
but...what's colour code?
my paint shop create a colour like the stock but dont try the ducati's code colour!anyone have this?
another progress:i change all brakes and cluch tubes line,with a "frentubo"kit.
now cluch come back very fast!
- Sun Jul 20, 2014 5:50 pm
- Forum: 906 Paso
- Topic: Another Paso on Megasquirt
- Replies: 5
- Views: 6599
Re: Another Paso on Megasquirt
great work.
i am a megasquirt fan,was installed about 15 megasquirt on race car.
i like install one ms2 on my 907 to replace iaw.
this ecu with last release can work in sequential mode(like iaw)read direct the iaw trigger theeth and have individual cilinder fuel trim.
i am a megasquirt fan,was installed about 15 megasquirt on race car.
i like install one ms2 on my 907 to replace iaw.
this ecu with last release can work in sequential mode(like iaw)read direct the iaw trigger theeth and have individual cilinder fuel trim.
- Tue Jul 08, 2014 9:32 pm
- Forum: 907IE
- Topic: new member
- Replies: 22
- Views: 19668
Re: new member
thanks at italian people,grazie ragazzi. i work sometimes at fairings rebuilt. i paste the cutting parts and create the missing parts on front using glassfiber. is a long work and eat a lot of dust. here you can see where was cutting and the new part. fortunatelly have the air flow cover new and pai...
- Fri Jun 27, 2014 6:53 am
- Forum: 907IE
- Topic: new member
- Replies: 22
- Views: 19668
Re: new member
ok,i have this.and there is a connection under dash with 2 8mm screw. i find and buy this piece on web. another question:how the underseat fairings are connected on fuel tank? i have 2 big hole on fuel tank and 2 6mm screw with a litle rubber cylinder on fairings. i think there are some pushin conne...
- Thu Jun 19, 2014 1:48 pm
- Forum: 907IE
- Topic: new member
- Replies: 22
- Views: 19668
Re: new member
now i work to rebuilt the side fairings,and have a questions.
there are only 3 6mm and one 8 mm screws in each side connect fairing at fuel tank?(i paint it in red)
there are only 3 6mm and one 8 mm screws in each side connect fairing at fuel tank?(i paint it in red)