Search found 9 matches
Re: No spark
Thanks. Very good resource.
- Sat Nov 01, 2014 1:49 am
- Forum: 907IE
- Topic: Wellnuts / Fairing Mounts
- Replies: 1
- Views: 3280
Wellnuts / Fairing Mounts
Not sure if anyone posted this yet but just in case... here's a good source for the m6 wellnuts that hold the bodywork together on the 907 (and other models I suppose). http://www.desmoparts.com/products/parts-catalog/ktm/m6-wellnuts At $0.70 ea. you can't beat it. Shipping was a bit more than I wan...
Re: No spark
Well, not an exact match with the relays but all I had to do was switch the wires between blades 30 and 86 - not a big deal. She fired right up. Aired up the tires and went for a quick ride around the block. Gas was a little old but ran ok. The relay was a BWD R3245 from AutoZone (Normally Open, 5 b...
Re: No spark
Thanks higgy. While I was out running around today I ordered 2 relays from the auto store that may work. They'll be in tomorrow or Monday. If they don't work I will definitely hit you up for the Fiat relays. Actually that's the one we cross referenced the old one to - a 1973 Fiat 124 or something li...
Re: No spark
Checked the grounds and all is ok. Poked around some more and found that the fuel pump relay I substituted for the stock b047 / 12v-2335 was actually a normally closed relay so that's what was causing the 2nd relay to kick in. Trying to track down the correct relay now (Ducati dealer is looking and ...
Re: No spark
I managed to get a new ignition module but still no spark. I did get the plugs into another bike and they will spark so they are good. I also confirmed that the ground was ok and I did swap the timing and rev sensors around just for kicks even though no one ever played with them (at least not that I...
Re: No spark
New coils came in and they ohmed out same as the old ones. I put them on anyways. Still no spark. Going after the 2 BKL3B ignition modules next. I was cranking the engine without the plugs in for a while when I was originally troubleshooting this a couple years ago so maybe without the load I did bu...
Re: No spark
Thanks. That's the tech faq I was referencing. I ordered a set of coils off ebay. They were for a 916 but says they will work on a 907.
Hopefully this is it. Bikes been sitting still way too long.
Hopefully this is it. Bikes been sitting still way too long.
No spark
Finally pulled my '93 907 out from the back of the garage to try and get it running again. A few years back it just quit running - no spark. Tried getting it running a few times and then just decided to hang with my kids till they went off to college and/or find someone of the opposite sex to hang o...