Search found 21 matches
- Tue Jul 04, 2017 8:28 pm
- Forum: 907IE
- Topic: HELP! Rebuild of 1992 907ie clutch master cylinder
- Replies: 15
- Views: 15829
Re: HELP! Rebuild of 1992 907ie clutch master cylinder
sounds like the slave cylinder , mine was blown and leaking fluid when it failed... but i had the same issues , no pressure on the clutch lever , and it wouldnt shift at all.. and jump hard when i put it into 1st gear
- Tue Jul 04, 2017 8:20 pm
- Forum: 907IE
- Topic: voltage Issues
- Replies: 13
- Views: 13176
Re: voltage Issues
so i just wanted to give an Update for this thread so that in the future if some one else has the same problem they can see i fixed my bike.. I bought the voltage regulator off of ebay for $98.00 with free shipping .. all the wires were correct and it fit into the bracket just like the OEM part .. m...
- Mon May 08, 2017 5:29 am
- Forum: 907IE
- Topic: voltage Issues
- Replies: 13
- Views: 13176
Re: voltage Issues
The regulator is bad .. So i have to order a new one
- Mon May 08, 2017 1:07 am
- Forum: 907IE
- Topic: voltage Issues
- Replies: 13
- Views: 13176
Re: voltage Issues
So I believe this is the wires for the stator ...? Because on the other side is the clutch cover .. https://c1.staticflickr.com/5/4162/33710667093_8474c5498d_c.jpg i followed them up to the voltage regulator and found the plugs https://c1.staticflickr.com/5/4186/34390964221_a67eca8908_c.jpg when I r...
- Sun May 07, 2017 10:37 pm
- Forum: 907IE
- Topic: voltage Issues
- Replies: 13
- Views: 13176
Re: voltage Issues
ok thank i will check it today ....
found both for sale here in the US ..
http://www.electrosport.com/street-bike ... 0122a.html
found both for sale here in the US ..
http://www.electrosport.com/street-bike ... 0122a.html
- Sun May 07, 2017 12:03 am
- Forum: 907IE
- Topic: voltage Issues
- Replies: 13
- Views: 13176
voltage Issues
im not getting any voltage back to the battery when my bike is running... I should see 13.5 volts when it running , im only ready 12.22 , and it keeps dropping.. So can some one post here How to trouble shoot the stator .. and How to trouble shoot a Voltage Regulator .. step by step with pictures on...
- Mon Feb 13, 2017 9:44 pm
- Forum: 907IE
- Topic: starter Solenoid issues
- Replies: 5
- Views: 6522
starter Solenoid issues
so i went out to start the bike for the first time since last summer, and same old same , the starter Solenoid isnt clicking... so I check all my voltage , good to go there, take apart the start button and clean up the spring , and the contacts , all good there... So i take a screw driver and jump t...
- Wed Oct 07, 2015 7:26 am
- Forum: 907IE
- Topic: Rev counter gears part# 066792160
- Replies: 16
- Views: 14168
Re: Rev counter gears part# 066792160
im mechanically inclined , i changed both belts on the bike back in May ... rebuilt the clutch , and switched out the Master clutch reservoir , handle , clutch piston ...etc..etc..etc ... So i pulled the cover off today , looked at the front Cam , and Nut... it on there dam tight ... so I think i ne...
- Tue Oct 06, 2015 12:14 am
- Forum: 907IE
- Topic: Rev counter gears part# 066792160
- Replies: 16
- Views: 14168
Re: Rev counter gears part# 066792160
on the timing pulley :D If you remove the belt cover off the front (horizontal ) cylinder you will be able to see the cam belt goes around a pulley ( about 50mm dia ) , this is the cam pulley for that cylinder and there is a nut in the middle that not only attaches the cam pulley to the cam shaft (...
- Mon Oct 05, 2015 4:46 pm
- Forum: 907IE
- Topic: Rev counter gears part# 066792160
- Replies: 16
- Views: 14168
Re: Rev counter gears part# 066792160
Where is this timing pully nut located
- Mon Oct 05, 2015 1:33 am
- Forum: 907IE
- Topic: Rev counter gears part# 066792160
- Replies: 16
- Views: 14168
Re: Rev counter gears part# 066792160
HI , My REVOLUTION COUNTER GEARS are not spinning when the engine is running .... Where can i find a Replacement ?
Also does anyone Know what other bikes Use the same set Up ? and what other Model of Bikes Are compatible...?
Also does anyone Know what other bikes Use the same set Up ? and what other Model of Bikes Are compatible...?
- Thu Sep 17, 2015 2:33 am
- Forum: 907IE
- Topic: Paso in new Macklemore video
- Replies: 6
- Views: 6790
Re: Paso in new Macklemore video
i wasnt happy about the stunt rider , and the wheelies.... I baby the hell out of my 907 IE , i dont shift it up in the higher RPM, and I just ride it , nice and easy ... I love my bike , like a father loves a child ... It gets more attention than me when i ride it , and park it , Most people have n...
- Tue Sep 15, 2015 5:35 am
- Forum: 907IE
- Topic: Paso in new Macklemore video
- Replies: 6
- Views: 6790
Re: Paso in new Macklemore video
thats my motorcycle .... I am a friend of Ben"s .... they used my bike in the video , the stunt rider blew my clutch , but it was fixed with a new one once the shot was done .. funny I never thought I would see someone posting about it ? , but here we are .. Me and Ryan Lewis at the shoot in sp...
- Sun Jul 26, 2015 9:38 am
- Forum: 907IE
- Topic: Battery question
- Replies: 10
- Views: 7747
Re: Battery question
seems kinda crazy that the clock can kill the battery in 7 days ....
if i put my volt meter on the terminals while the bike is running I should read 13.7 volts ? correct
if not , then what do i need to replace on the bike ...?
thanks
if i put my volt meter on the terminals while the bike is running I should read 13.7 volts ? correct
if not , then what do i need to replace on the bike ...?
thanks
- Sun Jul 26, 2015 4:19 am
- Forum: 907IE
- Topic: Battery question
- Replies: 10
- Views: 7747
Battery question
I haven't rode my motorcycle in 2 weeks when i went to go start it up dead battery. So... The battery is 2.5 months old.... Did the clock drain the battery ?
2Nd question.... When the bike is running what should the voltage read coming back to the battery from the charging system.... ?
2Nd question.... When the bike is running what should the voltage read coming back to the battery from the charging system.... ?