sounds like the slave cylinder , mine was blown and leaking fluid when it failed... but i had the same issues , no pressure on the clutch lever , and it wouldnt shift at all.. and jump hard when i put it into 1st gear

so i just wanted to give an Update for this thread so that in the future if some one else has the same problem they can see i fixed my bike.. I bought the voltage regulator off of ebay for $98.00 with free shipping .. all the wires were correct and it fit into the bracket just like the OEM part .. m...

The regulator is bad .. So i have to order a new one

So I believe this is the wires for the stator ...? Because on the other side is the clutch cover .. https://c1.staticflickr.com/5/4162/33710667093_8474c5498d_c.jpg i followed them up to the voltage regulator and found the plugs https://c1.staticflickr.com/5/4186/34390964221_a67eca8908_c.jpg when I r...

ok thank i will check it today ....

found both for sale here in the US ..

http://www.electrosport.com/street-bike ... 0122a.html

im not getting any voltage back to the battery when my bike is running... I should see 13.5 volts when it running , im only ready 12.22 , and it keeps dropping.. So can some one post here How to trouble shoot the stator .. and How to trouble shoot a Voltage Regulator .. step by step with pictures on...

so i went out to start the bike for the first time since last summer, and same old same , the starter Solenoid isnt clicking... so I check all my voltage , good to go there, take apart the start button and clean up the spring , and the contacts , all good there... So i take a screw driver and jump t...

im mechanically inclined , i changed both belts on the bike back in May ... rebuilt the clutch , and switched out the Master clutch reservoir , handle , clutch piston ...etc..etc..etc ... So i pulled the cover off today , looked at the front Cam , and Nut... it on there dam tight ... so I think i ne...

on the timing pulley :D If you remove the belt cover off the front (horizontal ) cylinder you will be able to see the cam belt goes around a pulley ( about 50mm dia ) , this is the cam pulley for that cylinder and there is a nut in the middle that not only attaches the cam pulley to the cam shaft (...

Where is this timing pully nut located

HI , My REVOLUTION COUNTER GEARS are not spinning when the engine is running .... Where can i find a Replacement ?

Also does anyone Know what other bikes Use the same set Up ? and what other Model of Bikes Are compatible...?

i wasnt happy about the stunt rider , and the wheelies.... I baby the hell out of my 907 IE , i dont shift it up in the higher RPM, and I just ride it , nice and easy ... I love my bike , like a father loves a child ... It gets more attention than me when i ride it , and park it , Most people have n...

thats my motorcycle .... I am a friend of Ben"s .... they used my bike in the video , the stunt rider blew my clutch , but it was fixed with a new one once the shot was done .. funny I never thought I would see someone posting about it ? , but here we are .. Me and Ryan Lewis at the shoot in sp...

seems kinda crazy that the clock can kill the battery in 7 days ....

if i put my volt meter on the terminals while the bike is running I should read 13.7 volts ? correct

if not , then what do i need to replace on the bike ...?

thanks

I haven't rode my motorcycle in 2 weeks when i went to go start it up dead battery. So... The battery is 2.5 months old.... Did the clock drain the battery ?

2Nd question.... When the bike is running what should the voltage read coming back to the battery from the charging system.... ?