Hi, I also have an 750 sport(bj90) I had already mounted an mikuni from an 900 SS (hope to put 2 dellorto's later) wich solved bad starting, and an smoother run now, my voltage regulator blew up, and I'v mounted an ignitech CDI(plug and play) and an camro voltage regulator (2 wire connection instead...

I had problems with my start motor, so I ordered a new back plate with the brushes at Stein Dinse in Germany (about 35 euro) and mounted them without problems, but when I tryed , the start motor reved hard but the engine dint't cranck over, afther looking, the back plate was in an wrong position : o...

Hi, the battery of my sport 750 doesn't work any more ; so i've looked around, and an lion ion is about 395 (!!) euro's and weights 1.2 kg (!!!!!!) with the high place it has, weight is important an gel battery is 86 euro and weights 4.5 kgrs and care free is 101 euro and weights 7 kgrs and an 'norm...

Hi, the battery of my sport 750 doesn't work any more ; so i've looked around, and an lion ion is about 395 (!!) euro's and weights 1.2 kg (!!!!!!) with the high place it has, weight is important an gel battery is 86 euro and weights 4.5 kgrs and care free is 101 euro and weights 7 kgrs and an 'norm...

Hi, the battery of my sport 750 doesn't work any more ; so i've looked around, and an lion ion is about 395 (!!) euro's and weights 1.2 kg (!!!!!!) with the high place it has, weight is important an gel battery is 86 euro and weights 4.5 kgrs and care free is 101 euro and weights 7 kgrs and an 'norm...

some news on my beautifull duc I've bought an set of mikuni's with the acording manifolds and K&N's, duc starts magnificent, runs better seems a bit too rich, but i' haven't let the carbs syncronised yet, so expect to be better afther, all that in order to have more time to decide if an reversed...

Hi, I've gbought an750 of 90 in reasonable state, my problem is it doesn't start cold unless i use start pilot, i've heard that the Weber carb is an pain in the ass I still have two brand new del lorto's with accelerator pumps, but they are 32 mm. my question is can I bore them to 36 on my lathe or ...