Search found 19 matches

by yosemite
Mon Jan 22, 2024 10:41 pm
Forum: 750 Sport and 900SS
Topic: 1989 750 Sport idle issue
Replies: 34
Views: 21606

Re: 1989 750 Sport idle issue

To be perfectly honest here, this is just a wild guess, and probably totally irrelevant to your bike but the 906 pasos have a fuel pressure regulator in the fuel feed to the carb where excess fuel is returned to the tank, does your bike have a similar system fitted, if it does does the regulator wor...
by yosemite
Sat Nov 18, 2023 9:31 am
Forum: 750 Paso
Topic: Bad Bearing
Replies: 3
Views: 5874

Re: Bad Bearing

That was a rubber sealed bearing, the bearing number was probably moulded into the rubber seal, if you need to identify it you can either use steine dinse or another supplier.
by yosemite
Mon Mar 20, 2023 12:52 am
Forum: 906 Paso
Topic: cam pulley
Replies: 4
Views: 10699

Re: cam pulley

Thanks paso750, probably saved me a trip and a hangover. Will get them posted and take the paso down to deliver the beer payment when its sorted, will also get a blast on his mhr bevel so will have too wait till weather improves cos he doesn,t let it out in the wet
by yosemite
Sun Mar 19, 2023 11:07 am
Forum: 906 Paso
Topic: cam pulley
Replies: 4
Views: 10699

Re: cam pulley

The bore on the pulley has a step worn in it about 0.6 mm fortunately there is no wear I can measure on the camshaft. Can you suggest an adjustable pulley I could use? The 916 pulleys would be free from a mate,well apart from postage or fuel to pick them up.
by yosemite
Fri Mar 17, 2023 7:23 pm
Forum: 906 Paso
Topic: cam pulley
Replies: 4
Views: 10699

cam pulley

hi the 906 developed a rattle the other day, got me home and when checked over found the pulley on the vertical cylinder was loose so stripped the head off and found quite a bit of wear on pulley bore however fortunately no measurable wear on bore got a chance of a couple of pulley from a 916, as fa...
by yosemite
Sat Dec 24, 2022 10:01 am
Forum: 906 Paso
Topic: Valve shim diameter
Replies: 3
Views: 3086

Re: Valve shim diameter

paso750 wrote: Sat Dec 24, 2022 8:51 am8mm
Thanks will get tools ordered
by yosemite
Fri Dec 23, 2022 10:40 pm
Forum: 906 Paso
Topic: Valve shim diameter
Replies: 3
Views: 3086

Valve shim diameter

Hi ,planning on checking the valve clearances, looking around the web there appears to be 2 different diameter shims that ducati use on different models each size needing different tools to measure and remove shims, so can someone please tell me which size ,7 or 8mm diameter are used on the 906 Thanks
by yosemite
Mon Oct 03, 2022 10:58 pm
Forum: for sale / for trade / want to buy
Topic: You gotta have a giggle sometimes
Replies: 3
Views: 4251

Re: You gotta have a giggle sometimes

Thats what I paid for mine when I bought it, the whole bike that is
Spent about the same on bits, belts, ignition, chain and sprockets, reg /rec and a couple of relays,.
Glued and patched up an indicator lens with clear araldite mixed with orange acrilyc paint
by yosemite
Thu Sep 29, 2022 10:11 am
Forum: 906 Paso
Topic: HELP NEEDED Regulator Wires Brown & Pink
Replies: 12
Views: 8605

Re: HELP NEEDED Regulator Wires Brown & Pink

Sorry for late reply. I think the coils are normally live when ignition is on ie they have 12volts supplied from the ignition switch , the signal side is tthe earth through the ignition module so if the ecu earth connection is not good or non existent then that could be the cause of your problems
by yosemite
Tue Aug 30, 2022 9:25 am
Forum: 906 Paso
Topic: HELP NEEDED Regulator Wires Brown & Pink
Replies: 12
Views: 8605

Re: HELP NEEDED Regulator Wires Brown & Pink

small led voltage meters are a cheap and easy fix. I used a charge warning light on mine wrhen I changed the regulator./ Rectifier https://www.google.com/search?q=improving+classic+motorcycles&ei=BNYNY7D-EbGx8gK98ozoDw&oq=improving+classic+motorcycles&gs_lcp=ChNtb2JpbGUtZ3dzLXdpei1zZXJw...
by yosemite
Mon Jul 18, 2022 9:23 pm
Forum: 906 Paso
Topic: On the Road Again
Replies: 2
Views: 2872

Re: On the Road Again

The rubber captive nuts are called wellnuts, try and get ones not made in china as the rubber breaks down, Rawl used to sell them as problem wall fixings in UK. I used M6 flanged stainless allen bolts and spacers were turned from a spare length of nylon bar Will be nice to see another 906 on the roa...
by yosemite
Wed Jul 28, 2021 8:08 am
Forum: 906 Paso
Topic: No vert cylinder - Digiplex?
Replies: 1
Views: 4411

Re: No vert cylinder - Digiplex?

Mine had the same problems, except the fault started as intermittent then went permanent ,fitted an Ignitech unit very happy so far cost was 188 euro for unit and an adaptor to connect wiringrather than spend time cutting and joining cables. fitted without any problems ran straight away once I remem...
by yosemite
Wed Jul 28, 2021 8:02 am
Forum: 906 Paso
Topic: engine dropping onto 1 cylinder
Replies: 7
Views: 8603

Re: engine dropping onto 1 cylinder

Hi fitted the new ignitech unit, fastened stray wiring out of way fitted tank, cranked bike over and ......nowt turned fuel on and let prime, bike fired up and ran well, fitted rest of fairing went for a quick ride, (was meant to be a reasonably paced test ride but you know how it is) and apart from...
by yosemite
Fri Jun 25, 2021 6:29 pm
Forum: 906 Paso
Topic: engine dropping onto 1 cylinder
Replies: 7
Views: 8603

Re: engine dropping onto 1 cylinder

Hi fault has now become permanent. so far checked pickup (only 1), coils by swapping , coil wiring by swapping(unplug from digiplex connector and swap over) , power supply to digiplex and coils replaced/ modified with relay as per wiring mod in FAQ . Ht leads plug caps plugs. none made any differenc...
by yosemite
Wed Apr 28, 2021 9:23 pm
Forum: 906 Paso
Topic: engine dropping onto 1 cylinder
Replies: 7
Views: 8603

engine dropping onto 1 cylinder

Hi since i put the 906 on the road its been dropping on to 1 cylinder, and after a few seconds it will pick up and run on both of course it always happens just before I go into a bend and picks up halfway round, makes life interesing. tried to check which cylinder was dropping out but as it only occ...