Search found 346 matches

by du907
Sun May 28, 2023 9:47 pm
Forum: 907IE
Topic: Best voltalge regulator suggestions
Replies: 8
Views: 8678

Re: Best voltalge regulator suggestions

It was raining yesterday so I had some time on my hands. I took my voltage regulator off (A 15 year old Electrex RR51) and replaced it with the original Ducati voltage regulator that I had replaced. Since the Electrex is charging the battery and otherwise working I wanted to see if the battery light...
by du907
Sat May 27, 2023 1:27 am
Forum: 907IE
Topic: Best voltalge regulator suggestions
Replies: 8
Views: 8678

Re: Best voltalge regulator suggestions

Replaced the plug connectors from the stator to the voltage regulator. Replaced both brake light switches and now brake lights work correctly. Had a fork seal blow on a club ride a couple of weeks ago and dripped down and ruined my brakes. I have finished replacing my fork seals and replacing brake ...
by du907
Fri May 19, 2023 9:56 pm
Forum: 907IE
Topic: Best voltalge regulator suggestions
Replies: 8
Views: 8678

Re: Best voltalge regulator suggestions

Higgy, Found the stator wire plugs melted where they plug into the voltage regulator plug at the steering head. This is not the first time. Put voltage meter at battery and at rest have about 13.14 volts. Start the engine and volts go up a little over 14 which seems to be normal after a start up. Th...
by du907
Sun May 07, 2023 4:13 am
Forum: 907IE
Topic: Best voltalge regulator suggestions
Replies: 8
Views: 8678

Best voltalge regulator suggestions

My battery light stays on sometimes from idle to about 3500 rpm. The battery is charging. I can ride all day and the battery light goes on and off. lights dim with the turn signals. I have no brake lights, switches are checking out OK. Sometimes the light comes on at idle, sometimes not.
Thanks
du907
by du907
Wed Sep 21, 2022 11:59 pm
Forum: 907IE
Topic: Bad Voltage Regulator?
Replies: 1
Views: 3643

Bad Voltage Regulator?

My battery light is coming on/going off and sometimes flickering while running 2,500 to 4,000 RPM. It does not come on at idle. I checked voltage and I'm getting 13.14 at idle and voltage keeps climbing as I get up to 4,000 RPM, would probably keep going higher with higher RPMs. I figure voltage reg...
by du907
Tue Sep 20, 2022 1:36 am
Forum: 907IE
Topic: 907ie Bits and Bobs Search
Replies: 4
Views: 4640

Re: 907ie Bits and Bobs Search

I believe I have the black plastic chain guard. I'll look tomorrow and let you know.

Also for graphics these guys can make everything. They make them for Ducati's restoration projects.
http://bike-stickers.com/homepage.htm
by du907
Tue Sep 20, 2022 1:27 am
Forum: 907IE
Topic: Electrical help please.
Replies: 9
Views: 7917

Re: Electrical help please.

As I was reading your posts I was about to suggest looking at the plug into ECU. Happened to me years ago. The bike just quit. I did the same as you, started checking everything and just so happened I was working on something and saw the plug hanging out. Push back in and all worked. I too used a zi...
by du907
Fri Feb 25, 2022 3:47 pm
Forum: 907IE
Topic: Fuel flow issue
Replies: 2
Views: 2200

Re: Fuel flow issue

Also I would check into using 900SS fork seals instead of the standard 907 seals. They are stronger and will last longer. There is some modification to make them fit. You can look it up on this forum. I did it and no leaks, 5 years now.
by du907
Fri Feb 25, 2022 3:41 pm
Forum: 907IE
Topic: Fuel flow issue
Replies: 2
Views: 2200

Re: Fuel flow issue

Pages from 907 IE Parts Catalog-3.jpg That's the Degaser #40. Or maybe some trash got dislodge when removing the tank. I would check and blow out the steel tubing in the tank. Also there is a "fuel reversion valve" #13 between the injectors and the degaser. The regulator is just behind th...
by du907
Wed Nov 10, 2021 1:50 am
Forum: 907IE
Topic: Upgrading front fork springs
Replies: 5
Views: 3939

Re: Upgrading front fork springs

Just a suggestion: I have replaced and cleaned my forks several times. I have a new set of 907 fork seals in a drawer. I don't use them anymore. I use 900SS seals from the same model year or later. I installed the 900SS seals more than five years ago and still no leaks.The original 907 fork seals le...
by du907
Mon Oct 11, 2021 10:22 pm
Forum: 907IE
Topic: Need help finding Ducati parts
Replies: 2
Views: 2317

Need help finding Ducati parts

I couldn't pass up the opportunity to get some info/leads from you guys.

I'm looking for the top fairing, the part that encompasses the headlight for my 2004 ST3.

Thanks for any leads you may give.
by du907
Mon Oct 11, 2021 10:18 pm
Forum: 907IE
Topic: Instrument panel screen
Replies: 7
Views: 7248

Re: Instrument panel screen

Arch,
Good luck finding that. I've been trying to find a new lens for years. I have a small crack in a corner on mine. It would be cool if someone could make one, don't know what that would entail.
by du907
Fri Sep 03, 2021 2:31 am
Forum: 907IE
Topic: $100 907ie
Replies: 61
Views: 46159

Re: $100 907ie

Arch, Take a look at this site. https://motolectric.com/makes/ducati.html I put these wires on mine and man does it make a difference. Bike starts just like they say, and it saves on the battery and starter clutch. And since my engine has been "built" and has more compression I needed some...
by du907
Fri Sep 03, 2021 2:21 am
Forum: 907IE
Topic: $100 907ie
Replies: 61
Views: 46159

Re: $100 907ie

Arch, Since you have so many Pasos, doesn't one of them start and run. If so I would check voltage at places of interest on the one that runs/works and compare to the one that doesn't start. Also check the square white plug on the left side zip tied to the rail back about the tail end of the tank. M...
by du907
Tue Jul 27, 2021 5:59 pm
Forum: 907IE
Topic: New 907
Replies: 7
Views: 7639

Re: New 907

Archie, Just call me with any questions. I need to get by your house for a visit. Went to the Italian weekend at 2 wheels in Suches Ga. at the end of June. I took the Paso but only got to ride 7 miles. My cousin and I arrived Thursday night and on the way to Dahlonega for dinner he crashed riding hi...