I have added a few other bits on Tech FAQ for clutch, fuel pump and fuel filters.

All stuff I use on my bike with no problems.

Great bikes,

Lets keep them on the road........Cheaply!

Sean

Clutch Slave Cylinder Upgrade This is the upgraded Ducati clutch slave cylinder. It takes the uprated seals from a 916/996 You also need the adapter bolt (which is sold seperately, not as part of the kit). Here is a picture of the final result http://www.ducatipaso.org/myPix/mixed/2-1.jpg Aftermark...

Pictures of the Aprillia 1000 thermostat as fitted to my 907ie http://www.ducatipaso.org/myPix/mixed/IMG00004.jpg http://www.ducatipaso.org/myPix/mixed/IMG00005.jpg http://www.ducatipaso.org/myPix/mixed/IMG00006.jpg http://www.ducatipaso.org/myPix/mixed/IMG00031.jpg You can see that there is a sligh...

Thermostat repair http://forums.ducatipaso.org/viewtopic.php?f=3&t=7884 http://forums.ducatipaso.org/viewtopic.php?f=2&t=7515 Alternative Thermostat Original Ducati thermostat is no longer available Best match is a thermostat from an Aprillia 1000 Engine runs slightly cooler (steady 80 cent...

907IE Fuel Pump and Filter/Strainer Fuel pump possibly same as BMW K series (k100, k1100) Weber/Bosch equivalent fuel pump, Ducati 907ie listed kit number 0580464993 (installed on my bike with no problems), cost £100 new from: Glencoe Ltd Glencoe House Drake Avenue Gresham Road Staines Middlesex TW...

I will get a picture over the weekend and post it. Temperature wise, it still runs at about normal around town (about 88 centigrade but stable at that temperature) with the fan cutting in as normal. However, out of town it runs at a stable 80 centigrade according to the temp gauge. The outlet from t...

Looking at other forums, and from personnal experience last year, it seems that there are several issues with the slave cylinder and seal. If the slave cylinder is not corroded and marked, then a seal from a 916 should solve the problem. If the cylinder is corroded, then for the 907 you need to buy ...

Some KTM hoses look like they might fit the paso.

As for the thermostat, I used an aprillia 1000 thermostat with a cut down 90 degree silicone hose and a link pipe.

My 907 had been in storage for a long time when I bought it. During recommissioning I tested the thermostat and found it not to be working. My solution was to fit a thermostat from an aprillia 1000 which only requires the use of a 90 degree silicone bend and piece of pipe. Much cheaper than buying d...