I fitted the 51A and have had no problems with it the friction plates look to have the same material as the paso plates have and the steel plates look the same thickness i removed 1 friction and 1 steel only because i mistakenly installed all the plates that came in the kit and the kit has 2 more pl...

23

Clutch kit part # 19020051A i fitted this kit to my 750 , no problems as yet

" It's been a while since I had my front wheel off the Paso, but I didn't have to do that. I didn't have to do anything out of the ordinary. If I remember correctly, I removed the two bolts from the caliper, slid the caliper back a little, gently rolled the caliper to pry the pads apart (pushin...

as mine is cracked i am interested also.

a happy and prosperous new year to everyone on ducatipaso.org

Dave

count me in for a set of M1R stickers please.

i will need replacements in the future.

Another 750 Welcome

Thanks Mike i received my stickers today

:thumbup: Thanks for the advice i thought steel was wrong. since i have had the bike it has leaked a small amount of engine oil from what looked like the crankcase half joint as you know the oil drain plug is sighted very close to this joint so i am presuming that the oil was leaking from the plug a...

What type of gasket/seal is supposed to be on the oil sump drain plug ? the one on my 750 Paso just has a hard steel washer .. is this correct i would have thought that there was a soft copper washer or O ring seal that went on the plug, my bike has always dripped a little oil from what i thought wa...

Wirral. North West England.
1989 Paso 750 red.

Thanks Steve the mirrors arrived this morning safe and sound.