I have a later version that i'm also about to sell. Although low on power there is something really appealing about riding one - it's a totally different experience to the other 3 sizes, even the 600 the engine braking is much less noticeable and you can place it on tight corners with far more confi...

partners/wives/husbands :- when the going gets tough you find out if you picked the right one - sounds like you really did Hamish

yes Todd, it's the BOTTOM shot of the carbs and no, you don't have to remove anything but it is slightly easier with fairings removed if they are of the 'full' variety. Best method is to find a variety of long screwdrivers and lay on your back with a good torch alongside bike (steering on lock might...

yes he has, O.C. - Hamish included some M.R.I. scans in a previous post on here - not for the squeamish.

I apologize Mr.giannicorse916 but, ducatipaso.org member or not, you need to get some help . . . :thumbup: I agree - have had some correspondence with 'gianni' in the past when he was selling 900SS indicators at an exorbitant price and also claiming that they were obsolete and no longer available f...

Vorsprung Duke Technik

I guess they used titanium H? - I can have an M.R.I. without any problems despite my various added bits.

thinking of you, and hoping that your leg will come good.

seeing as we're covering all that's radical and lateral here, you can carefully insert a drill blank etc down through the valve guide until you touch something then mark it and withdraw it so you can measure it. Slightly crude I know, but depending on the dimension you could get an idea how much of ...

that's a total pain Higgy - is there no way of hooking it back up with a convluted bit of wire through the plug hole? never done it myself it's true.

Good on you Hamish - not sure I could keep my sense of humour so intact considering all your going through, hope the cat's forgiven you.

Gio...I did the CSI trial as well. Tried with 3 other shims,found every one of those when they hit the floor. Couldn't get the spin just right I guess :beer: :beer: literally lol Higgy - only just read this! I thought of replicating 'incident' just like you but was afraid that they too would disapp...

I bought 20 recently for various Ducati/Cagiva bikes but can't find the link - there are several manufacturers that sell them for around £1.50 each - ok, so they might not be identical to original spec but no-one could tell! Closest at the mo :- http://www.ebay.co.uk/itm/Anti-Vibration-Mount-Rubber-...

paso750 wrote:
giocast, I know there are other Keihin sizes, but the 39 and 41 is the usual that`s being sold in retail.

G.

Still needed clarifying though Gerhard, hope you are generally well (as well as awake)

Look at this little beauty :- http://www.gumtree.com/p/cars-vans-moto ... s/98334119 ok,so it's not a Paso, but it is a relation and a real bargain by the look of it.