:o the kit i have is not for a wet/oil clutch & they are the same as the old clutch plates i replaced when i did my clutch and the part # is 19020051A and they work perfectly no problem. I hope you get yours sorted ok. check this thread " clutch...DaveM " in " 750 paso discussion&...

# 19020051A Clutch plate kit = £71.68 from Ducati dealer in UK

may be you can get it welded got to be worth a try .

I am glad you sorted the clutch out and it works ok. best of luck with the oil filter etc.

Desmodave you have a PM.

Welcome in

If you can wait till the weekend i will take mine apart and see what order they are in as it a while ago that i renewed the plates i will need to have a look see and i will let you know ok.

I do not understand why you have no drive after 4,000 rpm?, i fitted the clutch plate kit # 19020051A it comprises 8 friction plates and 8 plain plates, i have 2 of each left over in the box so there are 6 of each that i fitted and i have no problems with my clutch, seems that you must have a proble...

When i renewed the clutch plates on my 750 Paso the pack that i got given by the dealer was # 19020051A and cost £71.68p i fitted them and no problems as yet, clutch works ok.

Dave.

I am interested in a pair but it depends on price/total cost.

Finnpaso thats the best idea i have heard, hopefully it will have some effect and maybe Michelin will make the tyres again if we all sign up to your " card of condolence" it's got to be worth a try.

Dave.

Rocket man said " Over the years, I had forgotten that the engine tended to ?? pop in the cylinder area, and stumble; eventually leading to it dying. It may be a misfire?? It doesn't do this until the engine has warmed up for ~ 5-10 minutes at stand still, and is at idle. I found that it would,...

Very nice looking sport.

Skins there is an article about altering the swing arm on this site
http://www.enthusiast.co.nz . using a bridgestone BT45R 150/80/16.

Dave.

Nooooooooooooo, I can't believe it You can reach them at (quite) any good ironmonger's shop but also on Internet. I replaced a lost screw with a kitchen's one. Good luck. Ciao Have NOS size 8x15mm used at top of fairing at tank and bottom center. Have 20. $2 each plus postage. Also have 6mm welnuts ...