Search found 1527 matches

by Tamburinifan
Sun Jul 01, 2007 1:09 am
Forum: 907IE
Topic: Replacement front sprocket for 907
Replies: 50
Views: 21271

Shaved off 2mm from a M900 carb sprocket (thick side) & made 4,5mm spacer washer to sprocket.
Rode 85 km`s today, checked, seems fine, sprocket little loose w a bit of freeplay as 907 OEM.
by Tamburinifan
Sun Jul 01, 2007 1:04 am
Forum: 907IE
Topic: Hi! Newbie w questions
Replies: 33
Views: 16378

Wow, 15/46 sounds extreme! What RPM`s in 6th at 120km/h?

Tried 14/39 (shaved off a M900 front sprocket!), quite OK, 4400 RPM 6th gear at 120km/h. Think it will be15/41 next spring.
by Tamburinifan
Sun Jul 01, 2007 12:59 am
Forum: 907IE
Topic: To FIM or not to FIM...
Replies: 17
Views: 8586

Thx, Antti! :thumbup:
by Tamburinifan
Sun Jul 01, 2007 12:57 am
Forum: 907IE
Topic: 907ie power increases
Replies: 6
Views: 4237

Easiest and usually most bang for da buck is HiComp pistons.
Also heard many speak positively about a welltuned FIM chip, even w a bike w just open air & exhaust.
by Tamburinifan
Sat Jun 30, 2007 12:16 am
Forum: 907IE
Topic: To FIM or not to FIM...
Replies: 17
Views: 8586

I have:
Weber 1IAW Italy 043/04 Marelli electronica WU43.07/20A.28
EU on lid
Chip:
Ducati 907ie -23- 04

Do I have a P7 w a OEM ducati chip?
by Tamburinifan
Wed Jun 27, 2007 8:35 pm
Forum: 907IE
Topic: Hi! Newbie w questions
Replies: 33
Views: 16378

My ECU name:
Weber 1IAW Italy 043/04 Marelli electronica WU43.07/20A.28
EU on lid
Chip:
Ducati 907ie -23- 04

Do I have a P7 w a OEM ducati chip?

Anyone has a pic of their open airbox lid? Do you just open it as much as possible or what?

Most popular gearing? Had 15/39, really high!
by Tamburinifan
Wed Jun 27, 2007 1:05 am
Forum: 907IE
Topic: Replacement front sprocket for 907
Replies: 50
Views: 21271

Excellent find, DesmoDog, thx! :thumbup: M900 carb 1993-99 front sprocket does not fit, tried today. M900IE 00-02 had another sprocket, due to 748 gearbox w longer gear shaft. The thing that matters is distance between toothed washer and centre of sprocket. If that is correct, it aligns and all is O...
by Tamburinifan
Tue Jun 26, 2007 11:55 pm
Forum: 907IE
Topic: To FIM or not to FIM...
Replies: 17
Views: 8586

OK, will check my ECU, thx again, Antti.


2) What would be the benefits?
Here is very good info:
http://www.sigmaperformance.com/weber-ultimap.html
by Tamburinifan
Tue Jun 26, 2007 2:01 pm
Forum: 907IE
Topic: To FIM or not to FIM...
Replies: 17
Views: 8586

Gothenburg.
by Tamburinifan
Tue Jun 26, 2007 10:36 am
Forum: 907IE
Topic: To FIM or not to FIM...
Replies: 17
Views: 8586

OK.
Thx, Antti!
by Tamburinifan
Mon Jun 25, 2007 9:41 pm
Forum: 907IE
Topic: To FIM or not to FIM...
Replies: 17
Views: 8586

Mine is -92 in the papers but w black Brembos so maybe a -91, right? Does mine have an early P7 or what? How do I check this? If I have P7, will I need this Additional Memory Board (see quote from Sigma below) to use the FIM fully? FIM redesigned the operating system in the Weber ECU's unit to add e...
by Tamburinifan
Mon Jun 25, 2007 3:45 pm
Forum: 907IE
Topic: Engine swap?
Replies: 32
Views: 14632

Antti,
have you weighted the old flywheel?
dyno`d after mods? Guess you`re +90Hp... :thumbup:
by Tamburinifan
Mon Jun 25, 2007 12:43 am
Forum: 907IE
Topic: Engine swap?
Replies: 32
Views: 14632

I`ve been told 907 has SS cams but that don`t match the specs here in the 907 FAQ: Inlet valve: 43 mm diameter Opens before TDC 20 degrees Closes after BDC 60 degrees Exhaust valve: 38 mm diameter Opens before BDC 58 degrees Closes after TDC 20 degrees Check differences on Duc cams here: http://www....
by Tamburinifan
Mon Jun 25, 2007 12:32 am
Forum: 907IE
Topic: Hi! Newbie w questions
Replies: 33
Views: 16378

So the they are Contis and it`s a good system? Great. 8. I also am searching for a good injection cleaner, any advice would be welcome. Had absolutely no idle, just died at traffic lights etc. Tried STP Injection Cleaner today. After 70km`s almost idle, 170 km`s idle! Not perfect but much better! Di...
by Tamburinifan
Sat Jun 23, 2007 8:43 pm
Forum: 907IE
Topic: Hi! Newbie w questions
Replies: 33
Views: 16378

Will check the Contis.

Will use your revlimiter :thumbup: .

More Q:
Do any other Duc model`s cans fit (or w small mods)?
Are there any aftermarket handlebars available?

Gert