Mine has deformed somewhat over the years but it measures between 14.7-15.5mm if that helps, I'm assuming that the 906 & 907 are the same.

Ken

higgy wrote:https://www.youtube.com/watch?v=pk9Ni-rj4dg

Thanks higgy.

I figured if the lead wires are burnt so are the stator windings. Hi higgy, Is there a reliable test for checking the stator? I checked mine with a multimeter and it has about 1.4ohm resistance between the windings but none of them are shorting to earth. I've been looking at the the Shindengen Mosf...

The alternator wires on my 906 have been getting hot at the connectors near the alternator so I've had to strip the cable back about 4" to get rid of the burnt bits, so now I need to replace the cables back to the regulator. What size cable should I use? Also I was thinking about leaving out th...

Rudiger

Are you still going to send some samples for testing like you offered or is that deal off now?

Great news Rudiger. Looking forward to see how they come out.

Sheff928 wrote:There is one on eBay: 310662013477
Kindest regards,
Kevin

Any good engineering shop should be able to repair your swingarm quite easily, even the one on ebay.
Would I pay $150us for one in that condition, not as long as my arse points to the ground,tell him he's dreaming.

Why don't you just give Ian a call, he'd most likely sell you one for that price anyway.

i got a project in my head and i am running with it :) it will be cheap(i have some mad fab skils) but its pretty much a naked bike with a custom tank(unless i can find a duc one that fits close) custom seat, and so forth.. i am just not a fan of fairings.. i know they serve a porpose but i dont wa...

With the STL for the little slider, I can make a lot, basicly for the cost of the shipping I don't know the lifetime of these material with the chain in contact. I must only build something on a Plastic machine, I am at the moment more working on the Metal machines The STL file for the small one is...

I was busy all weeks with our Metal machines and looked on Friday to the file - It was so small. I scale the part by factor 10 and a kolleg build me one in Black PA11 I am not shure that the Dimention is right Got it worked out. When I saved it to a STL file the settings were in centimeters when th...

around 226mm long, 28mm width Hi Rudiger Looks great :thumbup: , those measurements correspond to what I had drawn up. I have emailed you 2 pdf files with most of the measurements for you to verify. I'm not sure why the scale changed when I changed the file to STL format but it looks like you have ...

Welcome to the mad house Troy

Mc tool wrote:If you want to get to NEW ZEALAND you gotta be able to spell it that's how we keep all the Aussies out ,( and that's why the Aussies call Australia "Oz".......coz they can spell that )

There you go again Mctool, all blah blah baaa baaa

That would be nice to have sitting in the shed.