any thing can be made to fit ! I would try the local bike wreaker , looking for something roughly the right size and worry about the mounts later . the local hydraulic hose repair man may be able to make , or modify original hoses to fit . Brackets can be made ( 4mm ally plate )I have a friend who &...

just to let you know , the sight glass is holding up well, 7000 k's , 2 oil changes

I needed new brushes for my 900ss (1997) and baulked at paying nz$80 for the parts so I went to the local auto sparky and got a pack of 4 brushes for 12 bucks . Each brush needed a swipe with a file to fit and a small soldering job to fit to the brush plate. Most auto sparkies can also supply a suit...

yeah there is a lot of confusion here. A I understand michelin are the only ones who make them in the correct sizes , 130/60/16 front and 160/60/16 rear I was originally told ( by a michelin retailler ) that the company only made the tyre in batches once a year, then I was told that they wern't goin...

ducati do .My 1990 paso has a steel flywheel and my 1997 sl has an aluminium flywheel . the paso is inflicted with a webber -marelli ignition system where as the S L has a koukosan ( spelling ? ) I dunno for sure but maybe the 907 has the koukosan ignition , which would mean that the SS or SL flywhe...

I have 2 dukes, a 1990 906 paso , and a 1997 900 superlight . The paso has 67000kms and the only thing ( apart from replacing the friction plates because the friction surfaces had worn out....use the sintered ones )I have done is relpace the oil seals on the input shaft and on the driven gear as bot...

Someone was asking about sight glasses for the oil level somewhere in this web site but buggered if I can find it now Anyhow What I did was to get an ordinary oil seal the correct diameter and cut the lips out of it , leaving just the outer ( rubber coated steel ) ring . I then pestered the local gl...

Silca ( italy ) also do a blank # ZD10p for the paso tiz a short key with a black plastic cap
cheers

What ? me wrong ? that would be a first ( ha ha ha ) the system is largely self ballancing in that if the load on the alt is say 150 watts then the alt only supplies 150 watts . All the loads in this system are in parrallel so the more stuff you switch on the lower the overall resistance of the circ...

Hi Duckboy what you are looking for is a thing called "Ohm's law " This is a basic formula to calculate the watts , current flow ( measured in amps ) and the resistance ( to current flow, measured in ohms ) This formula can be transposed to calculate any of the components above Your altern...

My paso is a 1990 model 906 and when I bought it there was an interesting fault with the electrix , whilst riding , any increase in load on the electrical system ( turning on the lights , blinkers , brake lights or even the horn sometimes ) would result in a momentary loss of power accompanied by a ...

I remember reading ( I can you know !) in a two wheels mag cicra 1990 that there is a hella light that can be fitted to the paso with little modification. The article even gave a part number ...... which I now cant find ( the wife is a very tidy person, in fact if you stand still to long in our hous...

There is an outfit in oz ( australia ) called Gowanloch motorcycles who recently supplied me 3 160/60/16 michelin tyres , and the guy there ( Troy ) didnt seem to think there was a problem getting them , which is not what all the dealers I contacted here in NZ told me . All up they cost me $ nz 420 ...

I have been eyeing this cross shaped junction thing in the exhaust with some suspicion . Can any one tell me if this thing robs as much power as it looks as if it might ?Is it worth making up a "straight thru " system , with a cross over pipe ?

You certianly can get it welded, any sheet metal worker should be able to either mig or tig weld this ( you may have to do a bit of filing to finish the job off ).You will , of course have to remove the swing arm, sooooo I really hope the pivot bolt isn't rusted in as mine was