Search found 70 matches
- Mon May 09, 2005 8:32 am
- Forum: 750 Paso
- Topic: Damn Dellortos
- Replies: 2
- Views: 2715
I had a similar problem, idled @ 3k. Gear in and slow clutch release the only ting to take it down. I got recommendation from a duc-shop to check the idle air mix, turning 1/2 turns in or out to start with. I did not do it myself, the bike was in for service for other reason and I asked them to make...
- Tue May 03, 2005 7:09 pm
- Forum: 750 Paso
- Topic: New brakes mounted
- Replies: 0
- Views: 7949
New brakes mounted
Hello, As mentioned in a prevoius posting, I have mounted new brakes on my Paso, Brembo P4 30/34 65mm mounting. See some pics @ http://alltomingenting.no-ip.info/paso @ same site I have also the drawings of the adapter, http://alltomingenting.no-ip.info/paso/caliper_adapter.html Here are also techni...
Here are some pictures of my bike, with the new brakes mounted.
And some more.
http://hem.passagen.se/ansim/
until I get a gallery account here.
//Anders
And some more.
http://hem.passagen.se/ansim/
until I get a gallery account here.
//Anders
New fork?
Have anyone changed the fork on the Paso? Any suggestion what to look for, future upgrades. I have legs from a monster 600 2001 available here. There are no problems with the brakes, I have converted to 4 pots Brembo 34/30 65mm mounting. Works very nice.:thumbup: Thanks Gerhard Hippe and Harige Harr...
- Sun Jan 23, 2005 2:15 pm
- Forum: 750 Paso
- Topic: Carb cleaning
- Replies: 4
- Views: 3993
Hello, I noticed that the carbs won't get clean. The Gunk stuff can be very tricky to get hold of here. Another thing: The fuel pump was on and I plan to remove it. I assume I have to mount on a separate open/close vent then? Is there any electric open/close vent available somewhere? Use the same el...
- Sun Jan 23, 2005 10:49 am
- Forum: 750 Paso
- Topic: Carb cleaning
- Replies: 4
- Views: 3993
- Sat Jan 22, 2005 9:21 pm
- Forum: 750 Paso
- Topic: Carb cleaning
- Replies: 4
- Views: 3993
Carb cleaning
Finally starting to dismantle the bike before the spring!
Starting with the carbs: clean, change cables and gaskets.
The question, what is the best to clean the carbs with?
///Anders
Starting with the carbs: clean, change cables and gaskets.
The question, what is the best to clean the carbs with?
///Anders
- Wed Nov 03, 2004 10:26 am
- Forum: 750 Paso
- Topic: Dellorto & fuel regulator
- Replies: 7
- Views: 5122
- Mon Oct 25, 2004 10:44 am
- Forum: 750 Paso
- Topic: Dellorto & fuel regulator
- Replies: 7
- Views: 5122
Dellorto & fuel regulator
Hello,
I saw in some guides for the Weber, that a fuel regulator is a good investment for the low rpm handling, decresing the pressure to 2.5-3.
Is it the same when the bike has Dellorto 40s mounted?
Will it be an advantage to mount a regulator and decrease the pressure?
//Anders
I saw in some guides for the Weber, that a fuel regulator is a good investment for the low rpm handling, decresing the pressure to 2.5-3.
Is it the same when the bike has Dellorto 40s mounted?
Will it be an advantage to mount a regulator and decrease the pressure?
//Anders
- Tue Oct 19, 2004 9:19 am
- Forum: 750 Paso
- Topic: Front fork maintenance
- Replies: 1
- Views: 3674
Front fork maintenance
Hello, During the off season, I'm planing to maintain the fork to start with. The bike is -87 and the fork is the Marzzochi M1R. I have no clues when it was maintained last time. Got the bike September this year and I will do a complete maintenence of it, starting with the fork. Is there any mainten...