Announcements

discussions specific to the 750 Paso

Moderators: paso750, jcslocum

Post Reply
aldo.agus
Posts: 6
Joined: Mon Mar 24, 2008 4:44 pm
model: 750 Paso
year: 1986
Location: Italy

Announcements

Post by aldo.agus »

Hello everyone! I replaced the coils were 30 years old I replaced with Dynatec ...
Truly excellent!
Attachments
20180701_112405.jpg
20180701_112405.jpg (250.06 KiB) Viewed 4525 times
20180701_112339.jpg
20180701_112339.jpg (269.41 KiB) Viewed 4525 times
davidrose
Posts: 14
Joined: Sun Apr 27, 2014 4:20 pm
model: 750 Paso
year: 1988
Location: USA

Re: Announcements

Post by davidrose »

That they worked and it is running is great news, but good grief, clean up the wiring!
And, how did the left side panel upper nut hole get ripped open?! Possibly a large drill was used to install body work bolts?
User avatar
paso750
paso grand pooh-bah
Posts: 5558
Joined: Sun Jul 18, 2004 12:00 am
model: 750 Paso
year: 1987
Location: southern Germany

Re: Announcements

Post by paso750 »

David that is how the original wiring looks like.
aldo.agus what you should do is measure the voltage. Since the wiring is original you may still have the typical voltage loss which means that the coils will not work with their full potential. Also check the FAQs or the download topic for the wiring mod.
aldo.agus
Posts: 6
Joined: Mon Mar 24, 2008 4:44 pm
model: 750 Paso
year: 1986
Location: Italy

Re: Announcements

Post by aldo.agus »

Ciao!Scusate se vi rispondo in Italiano...come ho scritto ho dovuto sostituire le vecchie coils e relativi cavi sparks,perché ormai guasti,ho controllato i cavi ingresso (arancio/nero -azzurro chiaro-arancio) e sono in buone condizioni.
Il miglioramento è per me molto evidente,non più buchi o mancamenti versoi 3500/4000 giri/minuto,ma molta più fluidità.Vedrò per curiosità e scrupolo di effettuare il controllo e farvi sapere!
Post Reply