DUCATI PASO 750 & 906 NEW RUBBER FAIRING NUTS

[20YearOwner]

I have extra fairing nuts if you need them. I can post to USA only. $2ea.

DUCATI 750 & 906 PASO New Replacement Rubber Nuts.

Replacement rubber with brass inserts to fit the bodywork, fairing upper & lowers, side covers and turn signals PASO models 6MM.

[paso_rosso]

PM sent! i could use a few!!

[Horse]

You have any left? If so please PM me. Horse.

[samandkimberly]

You have any left? If so please PM me. Horse.

you can buy separate well nuts, or a whole Paso fairing bolt kit here:

www.bikebolts.com

I helped him put the kit together so I know it fits a 907ie perfectly. I don't think there's any real difference in the fairing fasteners between 750/906/907.

[Desmo_Demon]

Replacement rubber with brass inserts to fit the bodywork, fairing upper & lowers, side covers and turn signals PASO models 6MM.

I have aftermarket fasteners on my Paso.....are these wellnuts standard M6 welnuts? If so, here's a source where they are $0.70 each...

http://www.desmoparts.com/ducati/wellnut/wellnut.htm#

[higgy]

M6 wellnuts are not hard to find,Home depot has them as well as many industrial supply houses
.70US is not a bad price

[ducapaso]

Yellow bolts are also available in Ducati: here's the one for the ST2 front mudguard:


Sorry for my dirty fingers!!!

[joelbb115]

After finding the 6MM well nuts on-line for $0.70, with a shipping/handling of $7.00, that was the best deal I could find, but the shipping charges killed it (only needed 6 of them).

I did find them at Lowe's in the hardware section, pretty cool as I had called nut and bolt specialty places, and hardware stores and neither had them. They were $0.92 each, and worked perfectly but if you need more than five, you may have to visit multiple Lowe's because each store will only stock five of them.

[higgy]

In the states you can find them at MSC or McMaster Carr and many Ducati aftermarket sources as well.

[cellardoor]

Wow thank you! I have been looking for wellnuts for a while, Lowe's saved me from buying a complete and overpriced set of fairing bolts! this would be a good one for the tech faqs...

[persempre907]

http://cgi.ebay.com/ebaymotors/25-M6-1- ... ccessories

...and a good source for some black anodized M6 bolts?
Ciao

[ducapaso]

Francesco,
Any suggestion for Ebay Italy?

[ducapaso]

Here it is! I've been lucky in finding, in the next days I'll tell you the price they asked me
http://annunci.ebay.it/annunci/ricambi- ... 3#rispondi

[higgy]

Ah !!! The very special MV wellnuts

[20YearOwner]

Update on well nuts:

I found a source for an auto well nut that fits the Paso.

Made by Au-ve-co Products they are located in Cold Springs KY, 41076 USA

Well Nuts, Box of "50", Part #13003, Size M6-1.0

https://www.auveco.com

On the website search for part number 13003.