Page 2 of 2

Re: Replacing starter sprag clutch

Posted: Thu Aug 05, 2010 9:58 am
by Skins
Thanks, Brutus, for the good information. I might have a spare Ducati sprag on the way now.

Any chance of a few pics and details of the tyres and sprocket?

Re: Replacing starter sprag clutch

Posted: Thu Aug 05, 2010 10:12 am
by paso750
interesting info.
In the interchangeability list it says:
Bevel-twins sprag clutch: Rover car part number is 22A716. Please note that the outside diameter of the cage that holds the segments together needs to be turned down to 65.5mm.
Those are pretty cheap actually.
http://cgi.ebay.com/ebaymotors/Austin-M ... 41515c225c

the original one (BorgWarner = BWX) should be one of this series:
http://www.ringspanncorp.com/products.php?cat=9&prod=17

G.

Re: Replacing starter sprag clutch

Posted: Thu Aug 05, 2010 8:46 pm
by Brutus
Skins wrote:Thanks, Brutus, for the good information. I might have a spare Ducati sprag on the way now.

Any chance of a few pics and details of the tyres and sprocket?
Sure, currently I'm overseas. In about two weeks I can post a few pics.
Léon

Re: Replacing starter sprag clutch

Posted: Thu Aug 05, 2010 9:31 pm
by Skins
:)

Thanks, guys. One way or another, I'm confident I'll be back on the road again soon.

Re: Replacing starter sprag clutch

Posted: Sat Aug 07, 2010 6:27 pm
by paso750
in case someone in the future finds this thread and wants to further investigate: in a german forum some guy said the DC4972 from Flamang, Germany could be a fit, too.
(http://www.flamang.de/produkte/freilaeu ... bauart.pdf)

Re: Replacing starter sprag clutch

Posted: Sat Mar 17, 2018 11:15 pm
by commotoed
Thanks for this I just replaced mine and with these tips, easy peasy! Thanks Paso Forum!