I have read thru the posts on here, and a frequent recommendation is to use McMaster Carr to source these.
All the 6mm metric button head cap screws on their site have 10.5mm diameter heads. The OEM bolts have 15mm diameter heads, so they won't look the same.
Am I missing something here? Even worse, try finding a plastic washer in either the 6mm/10.5mm or 6mm/15mm ID/OD! Doesn't seem to exist.
I have tried Fastenal and HoloKrome, no luck with either of those.
Those eBay kits all seem to have the 10.5mm sized button heads, too.
Anyone have any success with this?
Fairing Bolts?
Fairing Bolts?
The $900 Paso: DellOrto's, Dyna 5 ohm coils, Ignitech TCIP4; finally, a new set of tires! Goldentyre GT070/071
The bike is gone, but the nightmares continue...
The bike is gone, but the nightmares continue...
- ducapaso
- paso grand pooh-bah
- Posts: 1097
- Joined: Sun Aug 01, 2004 12:00 am
- model: 750 Paso
- year: 1988
- Location: siena, italy
- Contact:
Re: Fairing Bolts?
try looking for something like this: http://www.ebay.it/itm/KIT-VITI-SET-VIT ... 9a5&_uhb=1
have a nice ride, Nicola
Black "DUKE" 751582
ex...Red "smooth" 753349
Black "DUKE" 751582
ex...Red "smooth" 753349
- persempre907
- paso grand pooh-bah
- Posts: 3312
- Joined: Tue Dec 06, 2005 12:00 am
- model: 907 I.E.
- year: 1992
- Location: Roma, Italia
Re: Fairing Bolts?
Not a bargain...
Francesco
Ducati 907IE 1992 Rosso
Ducati 907IE 1993 Nero
Moto Guzzi Galletto 1960 Sabbia
BMW R Nine t 2019
Ducati 907IE 1992 Rosso
Ducati 907IE 1993 Nero
Moto Guzzi Galletto 1960 Sabbia
BMW R Nine t 2019
-
- Posts: 364
- Joined: Wed Oct 27, 2010 5:52 pm
- model: 907 I.E.
- year: 1992
- Location: Essex UK
Re: Fairing Bolts?
Probolt do anodised alloy fairing screws(16mm). They do the washers too.
Re: Fairing Bolts?
Those Pro-bolt kits do look nice! And I always wondered why no one did body fastener kits in aluminum.900streetfighter wrote:Probolt do anodised alloy fairing screws(16mm). They do the washers too.
But I was hoping to find a source for just a couple of fasteners, here in the USA. Surprised it's such an unusual size head.
I'm just going to order a few used OEM from my buddy the Ducati parts breaker. The 8mm on the highest point on my tank will be converted to a 6mm, since he doesn't have any Paso bolts...
The $900 Paso: DellOrto's, Dyna 5 ohm coils, Ignitech TCIP4; finally, a new set of tires! Goldentyre GT070/071
The bike is gone, but the nightmares continue...
The bike is gone, but the nightmares continue...