ducatipaso.org

Anyone interested to do a run of the small chain sliders?

paso750 wrote:looking good. If the width is 28mm and the total length ca.22,7cm it should be right.

around 226mm long, 28mm width

Bock900r wrote:around 226mm long, 28mm width

Hi Rudiger
Looks great , those measurements correspond to what I had drawn up. I have emailed you 2 pdf files with most of the measurements for you to verify. I'm not sure why the scale changed when I changed the file to STL format but it looks like you have it under control anyway. I will have a play around with the software and see if I can make any sense of it.
Thanks again.

Bock900r wrote:I was busy all weeks with our Metal machines and looked on Friday to the file - It was so small. I scale the part by factor 10 and a kolleg build me one in Black PA11
I am not shure that the Dimention is right

Got it worked out. When I saved it to a STL file the settings were in centimeters when they should have been in millimeters, thats why you had to scale it up by 10.

Regarding the small center stand chain sliders, I could use several depending on price, lots of Paso's Thanks Arch.

With the STL for the little slider, I can make a lot, basicly for the cost of the shipping
I don't know the lifetime of these material with the chain in contact.

I must only build something on a Plastic machine, I am at the moment more working on the Metal machines

Bock900r wrote:With the STL for the little slider, I can make a lot, basicly for the cost of the shipping
I don't know the lifetime of these material with the chain in contact.

Better than nothing.

I'd take 3.

a330us wrote:Regarding the small center stand chain sliders, I could use several depending on price, lots of Paso's Thanks Arch.

But no photos

Bock900r wrote:With the STL for the little slider, I can make a lot, basicly for the cost of the shipping
I don't know the lifetime of these material with the chain in contact.
I must only build something on a Plastic machine, I am at the moment more working on the Metal machines

The STL file for the small one is on it's way, I'd be happy to test them out.

I give the file to a friend, he will build me some Hnad Full of the small one and some more from the swingarm slider. Just tae some time, I fly home for vacation

I found a noon running machine today in our Office , load 2 large slider and around 60 small chain Slider into the machine


There was white Nylon12 on the machine, so all parts come out White.

Great news Rudiger. Looking forward to see how they come out.

Bock900r wrote:I found a noon running machine today in our Office , load 2 large slider and around 60 small chain Slider into the machine


There was white Nylon12 on the machine, so all parts come out White.

Awesome!

Back in the office today, clean out the parts



Is there someone local (USA) I can send some for testing if the fit before I make them again

I'm in Pa, pm sent