Stator cover pic?

discussions specific to the 750 Paso

Moderators: paso750, jcslocum

Post Reply
ahdoman
Posts: 107
Joined: Sat Mar 19, 2005 12:00 am
model: 750 Paso
year: 1988
Location: Santa Clarita, Ca.

Stator cover pic?

Post by ahdoman »

Does anyone have a picture of the inside of the stator cover with the stator still in it? I need to run the wire from the stator but it's not clear how it stays clear of the flywheel.
1988 Red Ducati Paso 750
1999 BMW R1100S
User avatar
paso750
paso grand pooh-bah
Posts: 5558
Joined: Sun Jul 18, 2004 12:00 am
model: 750 Paso
year: 1987
Location: southern Germany

Re: Stator cover pic?

Post by paso750 »

if this helps. The wires coming out of the stator face the cover.
Attachments
Unbenannt-1.jpg
Unbenannt-1.jpg (35.28 KiB) Viewed 4672 times
ahdoman
Posts: 107
Joined: Sat Mar 19, 2005 12:00 am
model: 750 Paso
year: 1988
Location: Santa Clarita, Ca.

Re: Stator cover pic?

Post by ahdoman »

Thanks for the pic. I'm trying to figure out how to keep the wire from ending up in the path of the flywheel. It's a trick keeping it tight against the cover.
1988 Red Ducati Paso 750
1999 BMW R1100S
User avatar
paso750
paso grand pooh-bah
Posts: 5558
Joined: Sun Jul 18, 2004 12:00 am
model: 750 Paso
year: 1987
Location: southern Germany

Re: Stator cover pic?

Post by paso750 »

it looks like there is a piece of rubber (#30) which is stuck in the upper gap to hold the wires against the cover.
Attachments
d1.jpg
d1.jpg (79.42 KiB) Viewed 4662 times
User avatar
paso750
paso grand pooh-bah
Posts: 5558
Joined: Sun Jul 18, 2004 12:00 am
model: 750 Paso
year: 1987
Location: southern Germany

Re: Stator cover pic?

Post by paso750 »

ahdoman
Posts: 107
Joined: Sat Mar 19, 2005 12:00 am
model: 750 Paso
year: 1988
Location: Santa Clarita, Ca.

Re: Stator cover pic?

Post by ahdoman »

Yep. I got that. I'm more concerned about the cable between where it exits the stator and gets to the rubber block. There's not much clearance in there between the flywheel and the cover and there's nothing holding the cable down. If the cable creeps after the cover is put on the flywheel will come in contact with it.
1988 Red Ducati Paso 750
1999 BMW R1100S
User avatar
paso750
paso grand pooh-bah
Posts: 5558
Joined: Sun Jul 18, 2004 12:00 am
model: 750 Paso
year: 1987
Location: southern Germany

Re: Stator cover pic?

Post by paso750 »

From where the stator is mounted to the gap the wires pass and are held down by that rubber block there are maybe 2 inches. The wires in the rubber tube are not that flexible so where and how would the cable creep ?
All our engine covers are like that.
Attachments
155363362d88204364f7ec915377c0838.jpg
155363362d88204364f7ec915377c0838.jpg (122.23 KiB) Viewed 4640 times
4d17287de9b4f627134915d92f3a78491.jpg
4d17287de9b4f627134915d92f3a78491.jpg (86.13 KiB) Viewed 4640 times
Post Reply