It is currently Mon Dec 11, 2017 1:59 am

All times are UTC





Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Cheap replacement clutch friction plates
PostPosted: Sat May 30, 2015 2:31 pm 
Offline
User avatar

Joined: Mon Dec 15, 2014 11:05 am
Posts: 92
Location: Sleepy leafy South Birmingham UK
model: 750 Paso
year: 1987
These go straight in - http://www.ebay.co.uk/itm/251556999914? ... EBIDX%3AIT

plus you even get a spare . . .

_________________
2004 ST4S
2001 ST4
1987 Paso 750


Top
 Profile  
Reply with quote  
 Post subject: Re: Cheap replacement clutch friction plates
PostPosted: Sun May 31, 2015 10:49 am 
Offline
paso grand pooh-bah
User avatar

Joined: Sun Jul 18, 2004 12:00 am
Posts: 5100
Location: southern Germany
model: 750 Paso
year: 1987
did you check the dimensions yourself and compared them to an original friction disc?


Top
 Profile  
Reply with quote  
 Post subject: Re: Cheap replacement clutch friction plates
PostPosted: Sun May 31, 2015 2:01 pm 
Offline
User avatar

Joined: Mon Dec 15, 2014 11:05 am
Posts: 92
Location: Sleepy leafy South Birmingham UK
model: 750 Paso
year: 1987
No I just made it up for a laugh.


Seriously, I have them in my ST4S. I tried one in the Paso basket just to see whether the Paso basket is the same as the other baskets, and it is.
Lots of people are now putting these plates into Ducati clutches. Why pay megabucks when these are just as good.
They're aluminium btw.

Why has this been moved specifically to the Paso 750 section when it is relevant to all of the dry clutch bikes ?????

_________________
2004 ST4S
2001 ST4
1987 Paso 750


Top
 Profile  
Reply with quote  
 Post subject: Re: Cheap replacement clutch friction plates
PostPosted: Sun May 31, 2015 2:28 pm 
Offline
paso grand pooh-bah
User avatar

Joined: Sun Jul 18, 2004 12:00 am
Posts: 5100
Location: southern Germany
model: 750 Paso
year: 1987
the question is if the tabs on the outside and the thickness is identical just to know if they would rattle more and also if the stack height is identical.
I moved it here because you have a P750 and we don`t have a general Paso section. The announcement section is not were it belongs anyway. You can be sure that most forum members don`t only read in one specific forum section so your info isn`t "lost".

G.


Top
 Profile  
Reply with quote  
 Post subject: Re: Cheap replacement clutch friction plates
PostPosted: Sun May 31, 2015 3:09 pm 
Offline
User avatar

Joined: Mon Dec 15, 2014 11:05 am
Posts: 92
Location: Sleepy leafy South Birmingham UK
model: 750 Paso
year: 1987
I gauge them to be 2.8mm thick, so 7 of them will give 19.6mm, then 8 x 2mm steel and 1 x 1.5mm dished steel will give a stack of 37.1mm if the dished plate was flat - so maybe somewhere in the region of 37.5mm given the convex/concave shape. That's assuming the Paso stack is 38mm +/- 2mm as per the ST's I have. The tangs are a perfect fit.
They're close enough for Rock & Roll in my book.

_________________
2004 ST4S
2001 ST4
1987 Paso 750


Top
 Profile  
Reply with quote  
 Post subject: Re: Cheap replacement clutch friction plates
PostPosted: Mon Jun 01, 2015 8:28 am 
Offline
paso grand pooh-bah
User avatar

Joined: Sun Jul 18, 2004 12:00 am
Posts: 5100
Location: southern Germany
model: 750 Paso
year: 1987
the original #19110151A are:
id 115.7mm
od (w/o tangs) 140mm
width (w/o tangs) 12.7mm
tangs: height 6.2mm, width 12.1mm, thickness 1.95mm
(friction) disc thickness 2.96-3mm

The Suzuki is a wet clutch.


Top
 Profile  
Reply with quote  
 Post subject: Re: Cheap replacement clutch friction plates
PostPosted: Tue Jun 16, 2015 1:07 am 
Offline

Joined: Tue Dec 03, 2013 12:12 am
Posts: 68
Location: DePere, WI USA
model: 750 Paso
year: 1988
I have 10 Ducatis (88 Paso 750 - all the way up to a 08 1098s) and the baskets are all the same. Funny how Ducati didnt switch a thing for so many years! I didnt know the Suzuki plates fit thought as I often wonder if a Kawaski ZX7 plate would fit as I have a bunch of those sitting around! I might have to give it a shot!


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC


Who is online

Users browsing this forum: Majestic-12 [Bot] and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: