It is currently Sat Jun 06, 2020 2:33 pm

All times are UTC





Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Excenter problem
PostPosted: Fri Apr 03, 2020 5:32 pm 
Offline

Joined: Sat Sep 15, 2018 7:12 pm
Posts: 25
Location: Israel
model: 750 Paso
year: 1987
Hello
The right excenter is ziro with the swing arm, but the left one is not, look at the photo.
Any recommendation?


Attachments:
IMG_20200403_202923.jpg
IMG_20200403_202923.jpg [ 86.66 KiB | Viewed 553 times ]
Top
 Profile  
Reply with quote  
 Post subject: Re: Excenter problem
PostPosted: Sat Apr 04, 2020 3:20 pm 
Offline
paso grand pooh-bah
User avatar

Joined: Sun Jul 18, 2004 12:00 am
Posts: 5414
Location: southern Germany
model: 750 Paso
year: 1987
check if the excenter sits correctly on the splines


Top
 Profile  
Reply with quote  
 Post subject: Re: Excenter problem
PostPosted: Sat Apr 04, 2020 8:18 pm 
Offline
paso grand pooh-bah
User avatar

Joined: Wed Dec 05, 2007 12:35 am
Posts: 1742
Location: Newzealand
model: 906 Paso
year: 1990
The axle is splined at both ends , however there is one spline missing on each end of the axle ( looks like one extra wide spline) , there is a corresponding missing spline in each excentre ,the idea being that the excentres will only fit onto the axle in one position which keeps the axle square and level in the swing arm. If you dont get these splines correctly alligned the excentre wont go fully onto the axle. Sometimes a previous owner ( its never the current one ) being unaware of the spline allignment issue simply forces the excentre onto the axle, this can damage the excentre ( cuts the missing spline in the excentre ,as mine was ) . Fortunatley any miss alignment is easily spotted if you assemble the excentre , axle and swing arm without the wheel. If you check for square in both horizontal and vertical planes. If indeed the excentre has been forced its not a big issue , no new parts needed , you just have to check for correct allignment ( eyeball will do when you know where to look ) every time you reassemble the axle/excentre/wheel .
Hope this helps
Hamish

_________________
I wish I was young again............Id be heaps smarter than last time


Top
 Profile  
Reply with quote  
 Post subject: Re: Excenter problem
PostPosted: Sun Apr 05, 2020 9:10 am 
Offline
paso grand pooh-bah
User avatar

Joined: Thu Nov 03, 2011 10:13 am
Posts: 727
Location: Scotland
model: 907 I.E.
year: 1994
I haven't got eccentric adjusters but that's a really nice explanation Hamish. I can picture them perfectly. :)

_________________
1994 907ie
2017 Supersport 939
2015 Scrambler Classic
1982 Pantah 500SL (now sold)


Scotland


Top
 Profile  
Reply with quote  
 Post subject: Re: Excenter problem
PostPosted: Mon Apr 06, 2020 4:53 pm 
Offline

Joined: Sat Sep 15, 2018 7:12 pm
Posts: 25
Location: Israel
model: 750 Paso
year: 1987
Found two of this together After the Excenter.
After some digging found thet the missing one come After the sporckt.
So there is one Before and one After the sporckt.
Now everything is O.k.


Attachments:
inbound1529693841332933006.jpg
inbound1529693841332933006.jpg [ 148.78 KiB | Viewed 468 times ]
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


cron