Clutch release bearing, well nuts and float height
Posted: Tue Oct 26, 2004 9:59 am
For those interested the clutch release bearing on a 750 Paso, the one in the slave piston, is a 608-ZZ, the ZZ meaning metal shielded. It's a pain to remove the old one but well worth the hassle since the bearing is about £4 from a factor as opposed to £87+ for the complete piston from a Ducati dealer.
The correct fairing screw and Well Nut are 037099013 and 036499020 and are still used on recent Dukes so are still available from Ducati dealers. The Well Nut is actually a 6WN15A available from http://www.rivetwise.co.uk at £37 per 100.
DCNF float level adjustment details can be found on http://www.theape.com/float.html, although remember that the correct float height for the plastic float is 46mm, NOT the 48mm shown for the cylindrical brass float.
Hope this info is useful,
Steve.
The correct fairing screw and Well Nut are 037099013 and 036499020 and are still used on recent Dukes so are still available from Ducati dealers. The Well Nut is actually a 6WN15A available from http://www.rivetwise.co.uk at £37 per 100.
DCNF float level adjustment details can be found on http://www.theape.com/float.html, although remember that the correct float height for the plastic float is 46mm, NOT the 48mm shown for the cylindrical brass float.
Hope this info is useful,
Steve.