It is currently Fri Jun 23, 2017 5:14 pm

All times are UTC





Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: New member from England
PostPosted: Sun Jan 04, 2015 5:46 pm 
Offline

Joined: Thu Dec 04, 2014 8:22 pm
Posts: 12
Location: UK
model: 906 Paso
year: 1993
Hello

I have just brought a Ducati Paso 906, in light blue. I used to ride the 750 twenty years ago, I also used to own a Ducati Indiana. I saw an advert for the Paso and just couldn't resist, it looked great in blue.

Its being serviced at the moment, its done 7300 miles and was still on the original tyres when I brought it home, slightly worrying!!
Its having a major service and of course new tyres, also having a small leak in the water pump repaired.

Can anyone please tell me when it was made, the vin number is 000452, engine number 000081?

Many thanks, I look forward to chatting with other owners on the forum.

Thanks
Nick.


Top
 Profile  
Reply with quote  
 Post subject: Re: New member from England
PostPosted: Sun Jan 04, 2015 6:03 pm 
Offline
User avatar

Joined: Fri Jun 17, 2005 12:00 am
Posts: 314
Location: Cardiff, South Wales
model: 907 I.E.
year: 1992
Hi Nick - welcome to the best site on the web for 750, 906 and 907 info!

I am sure there is a list of serial numbers on here somewhere.

Where are you based?

Roger

_________________
Rogero
1992 "Red" 907 I.E.
2006 Harley-Davidson Dyna FXDBI (Street Bob)


Top
 Profile  
Reply with quote  
 Post subject: Re: New member from England
PostPosted: Sun Jan 04, 2015 6:15 pm 
Offline

Joined: Thu Dec 04, 2014 8:22 pm
Posts: 12
Location: UK
model: 906 Paso
year: 1993
Hi Roger

Thanks for the reply. I'm not too far from you, I'm in Somerset, just outside Wellington. I'm going to use the coming months getting back into riding, do you know if there are any meets in the UK at all?

Regards
Nick.


Top
 Profile  
Reply with quote  
 Post subject: Re: New member from England
PostPosted: Sun Jan 04, 2015 7:14 pm 
Offline
paso grand pooh-bah
User avatar

Joined: Wed Apr 09, 2008 9:57 pm
Posts: 1013
Location: Manchester, England.
model: 907 I.E.
year: 1992
Hi Nick

Welcome and here is some info for you

On to the 906s: Please appreciate that of the 350 Blue Bikes you may have a New bike re routed or returned from the American or Switzerland destination and also you may have also have had a colour change aftermarket.

906s

Europe and World
Red:
1988 - 502
1989 - 400
Blue:
1988 - 200
Black:
1988 - 100
1989 - 100

US:
Red, 1988 - 250
Blue, 1989 - 100


Switz:
Red, 1988 - 100
Blue, 1988 - 50

For a total of 1802 Paso 906s, from frame numbers PC 000001


Also please take note of this thread as it will be hopefully of some interest to you, - maybe?

viewtopic.php?f=1&t=6863

_________________
DUCATI PASO 906
DUCATI 907ie
BMW K100RS PATINA CAFE RACER


Top
 Profile  
Reply with quote  
 Post subject: Re: New member from England
PostPosted: Mon Jan 05, 2015 12:22 pm 
Offline
User avatar

Joined: Fri Jun 17, 2005 12:00 am
Posts: 314
Location: Cardiff, South Wales
model: 907 I.E.
year: 1992
Cheers Steve - Nick - I aim to go to the gathering in April on my 907 if it is in Lincolnshire (Scotland probaby too far) - if you fancy joining it would be good. We could meet at Aust / Leigh Delamere etc. - Just a though.

I went last year to the initial meet up in Mid Wales - it was good fun.

Keep in touch and there is loads on this forum - use the search engine - it is amazing what has been covered over the years.

_________________
Rogero
1992 "Red" 907 I.E.
2006 Harley-Davidson Dyna FXDBI (Street Bob)


Top
 Profile  
Reply with quote  
 Post subject: Re: New member from England
PostPosted: Tue Jan 06, 2015 8:19 pm 
Offline

Joined: Thu Dec 04, 2014 8:22 pm
Posts: 12
Location: UK
model: 906 Paso
year: 1993
Hi All

Thanks for the info, my 906 was first registered 2/09/1993, so it looks as though it might have been unsold for at least four years. Perhaps red ones are more popular!

I don't know what I am doing in the summer but Northumberland is a long way away from Somerset, but would be interested to a meet nearer home.

In the meantime, this is a photo of my 906


Image
Thanks
Nick.


Top
 Profile  
Reply with quote  
 Post subject: Re: New member from England
PostPosted: Sat Jan 17, 2015 8:26 pm 
Offline

Joined: Thu Dec 04, 2014 8:22 pm
Posts: 12
Location: UK
model: 906 Paso
year: 1993
can anyone help ?
I need 3 bits to get my bike on the road . a water pump seal. gasket for water pump housing and a gasket for
left hand engine cover. Can't find these parts. any help much appreciated. My bike , a 906.

Thanks Nick


Top
 Profile  
Reply with quote  
 Post subject: Re: New member from England
PostPosted: Sun Jan 18, 2015 4:31 pm 
Offline

Joined: Wed Oct 27, 2010 5:52 pm
Posts: 360
Location: Essex UK
model: 907 I.E.
year: 1992
The gaskets you need are common to all water cooled ducatis, 2valve and 4valve up to about 2001 as far as i know so you should be able to get them from a dealer. The left hand engine cover gasket was not available last time I took mine off a few years ago as the factory used sealant only and stopped stocking the gasket.


Top
 Profile  
Reply with quote  
 Post subject: Re: New member from England
PostPosted: Sun Jan 18, 2015 5:43 pm 
Offline

Joined: Thu Dec 04, 2014 8:22 pm
Posts: 12
Location: UK
model: 906 Paso
year: 1993
Thank you.

Nick.


Top
 Profile  
Reply with quote  
 Post subject: Re: New member from England
PostPosted: Sun Jan 18, 2015 6:17 pm 
Offline

Joined: Wed Oct 27, 2010 5:52 pm
Posts: 360
Location: Essex UK
model: 907 I.E.
year: 1992
Lovely looking bike btw. is exhaust 2:1?

On reflection waterpump seal might be model specific. someone here will be along to correct me.
Careful with the hoses, difficult to get.


Top
 Profile  
Reply with quote  
 Post subject: Re: New member from England
PostPosted: Mon Jan 19, 2015 6:50 pm 
Offline

Joined: Thu Dec 04, 2014 8:22 pm
Posts: 12
Location: UK
model: 906 Paso
year: 1993
Yes, exhaust is 2 into 1. Sounds very good. I am in two minds whether it is better to have as original or a good looking exhaust as this one is but it was on the bike when I bought it.
Thanks for the advice on gaskets. That is now sorted. Still no luck with water pump seal.
Hope I can find one soon.

Nick


Top
 Profile  
Reply with quote  
 Post subject: Re: New member from England
PostPosted: Mon Jan 19, 2015 8:46 pm 
Offline
paso grand pooh-bah
User avatar

Joined: Sun Jul 18, 2004 12:00 am
Posts: 5011
Location: southern Germany
model: 750 Paso
year: 1987
Nick, you`re better off posting issues in the 906 forum not here ;)
The waterpump gasket is #78810063A and the same on
Ducati 748 `99 SPS
Ducati 748 SP, Biposto
Ducati 851 Superbike Racing `91
Ducati 851 `90 SP
Ducati 851 `91-`92
Ducati 888 Superbike `92
Ducati 888 `93->
Ducati 906 Paso `88
Ducati 907 I.E. `92
Ducati 916 `94
Ducati 916 Monop.-Senna `95-
Ducati 916 SP `96
Ducati ST 2 `97
A Ducati dealer should have no problem getting it.

What`s the part number of the seal you`re looking for ? (you can download the parts catalogue from the site)

G.


Top
 Profile  
Reply with quote  
 Post subject: Re: New member from England
PostPosted: Tue Jan 20, 2015 7:19 am 
Offline

Joined: Wed Oct 27, 2010 5:52 pm
Posts: 360
Location: Essex UK
model: 907 I.E.
year: 1992
Nick, I believe your bike used to belong to David Harvey, who I met at an owners club meet many years ago. He did a lot of experiments with weber carbs and wrote articles in docgb magazine about his solutions.
Keith


Top
 Profile  
Reply with quote  
 Post subject: Re: New member from England
PostPosted: Tue Jan 20, 2015 10:06 am 
Offline
paso grand pooh-bah
User avatar

Joined: Sun Jul 18, 2004 12:00 am
Posts: 5011
Location: southern Germany
model: 750 Paso
year: 1987
According to the parts manual there are two oil seals.
The outer one is #937831625 and the inner one #937831624.

and according to Google:

#937831624 = CORTECO 12010799B (thickness 4mm, id 16mm, od 24mm. Profile BA)
= GARELLI 29867100, PIAGGIO-GILERA 780522, F.M. FABBRICA M 375460070900

#937831625 = CORTECO 12010801B (thickness 7mm, id 16mm, od 24mm. Profile BA)
= GOLDONI 06220058, LANDINI 3009830X1, ELRING 044008, MASSEY FERGUSON 3009830X1, GOETZE 5030045000

G.


Top
 Profile  
Reply with quote  
 Post subject: Re: New member from England
PostPosted: Tue Jan 20, 2015 10:15 pm 
Offline

Joined: Thu Dec 04, 2014 8:22 pm
Posts: 12
Location: UK
model: 906 Paso
year: 1993
G, Thanks so much for the info.
I need the water pump seal, not an oil seal. will look up the part number in the catalogue.

Nick


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: