ducatipaso.org
http://forums.ducatipaso.org/

320 mm disc conversion with 65 mm calipers
http://forums.ducatipaso.org/viewtopic.php?f=13&t=7876
Page 1 of 1

Author:  micap [ Fri Feb 23, 2018 4:37 pm ]
Post subject:  320 mm disc conversion with 65 mm calipers

I am doing a 17 inch conversion with custom spoke wheels, and at the same time upgrading the front discs to 320mm. I have a set of newer 65 mm bolt pattern brembo calipers, and therefore need a bracket. All I can find is brackets made for 280 mm discs, so the question is, does any of you have experience with this conversion? Drawings of a bracket, or know of any finished products?

Best regards
Michael

Author:  paso750 [ Fri Feb 23, 2018 5:16 pm ]
Post subject:  Re: 320 mm disc conversion with 65 mm calipers

from the P750 FAQs: https://www.box.com/shared/lzd6kxnkgk

Author:  micap [ Fri Feb 23, 2018 8:48 pm ]
Post subject:  Re: 320 mm disc conversion with 65 mm calipers

Awesome. Thanks. Did not think to look in the paso section.

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/