Page 1 of 1

Speedo drive question

Posted: Mon Mar 05, 2018 4:16 pm
by steveT2
Any idea if the speedometer drive on the 88-90 900SS is the same or is interchangeable with a later or any other models ?

Thanks
Steve

Re: Speedo drive question

Posted: Mon Mar 05, 2018 5:28 pm
by paso750
yes it is.
As a tip if you want to know something like this check the Stein Dinse website https://www.stein-dinse.biz/index.php?language=en. On the left of it you find the parts catalogues.
If a certain part is available you will find a link to the shop and often there you will find a list of Ducs that use the same part. If the part is not available as in this case you have to check the parts catalogues of different models or you check for the part number and google it.
49810011A fits the 9078IE, 851, 888, 750/900SS up to '97.

Another good source to check interchangeability of parts is http://www.desmoduck.com/index.php but this site only covers newer Ducatis. Some parts that were used on the Paso and Sport were still or are still used on newer Ducatis. The speedometer drive is not one of them.

G.

Re: Speedo drive question

Posted: Tue Mar 06, 2018 7:18 pm
by steveT2
Thanks for the info......

Re: Speedo drive question

Posted: Tue Mar 20, 2018 4:52 pm
by MatthiB
Hi guys,

I found this :
https://www.ebay.de/itm/Ducati-900-SS-9 ... 2749.l2649

and ordered one.
The measurements and the stamped on CEV number are the same as on the drive from my '90 supersport 900
Maybe that helps.

Re: Speedo drive question

Posted: Tue Mar 20, 2018 7:07 pm
by paso750
what's is the CEV number stamped on it?

Re: Speedo drive question

Posted: Tue Mar 20, 2018 8:37 pm
by MatthiB
paso750 wrote:what's is the CEV number stamped on it?
748209
and it's for a 17mm axle of course