It is currently Sun Feb 28, 2021 6:40 pm

All times are UTC





Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: 906 Paso Starter - UK
PostPosted: Thu Aug 30, 2012 12:59 pm 
Offline

Joined: Wed Jun 20, 2012 12:13 pm
Posts: 10
Location: UK
model: 906 Paso
year: 1988
New starter motor required or equivalent that will fit. Can it be rewound otherwise.
UK West Mids.
Anybody any ideas. In the middle of a rebuild and on a learning curve.
Adrian.


Top
 Profile  
Reply with quote  
 Post subject: Re: 906 Paso Starter - UK
PostPosted: Thu Aug 30, 2012 1:08 pm 
Offline
paso grand pooh-bah
User avatar

Joined: Sun Jul 18, 2004 12:00 am
Posts: 5418
Location: southern Germany
model: 750 Paso
year: 1987
sure it`s not just worn brushes ?

G.


Top
 Profile  
Reply with quote  
 Post subject: Re: 906 Paso Starter - UK
PostPosted: Fri Aug 31, 2012 10:57 am 
Offline

Joined: Wed Jun 20, 2012 12:13 pm
Posts: 10
Location: UK
model: 906 Paso
year: 1988
Dont think so until i get it apart, just seemed to seize up


Top
 Profile  
Reply with quote  
 Post subject: Re: 906 Paso Starter - UK
PostPosted: Fri Aug 31, 2012 4:54 pm 
Offline
paso grand pooh-bah
User avatar

Joined: Sun Jul 18, 2004 12:00 am
Posts: 5418
Location: southern Germany
model: 750 Paso
year: 1987
that could theoretically happen if the brushes are so worn the come out of their guides. In that case the windings could get damaged.

G.

http://www.stockers.com/


Top
 Profile  
Reply with quote  
 Post subject: Re: 906 Paso Starter - UK
PostPosted: Fri Aug 31, 2012 5:15 pm 
Offline
paso grand pooh-bah
User avatar

Joined: Sun Aug 01, 2004 12:00 am
Posts: 1097
Location: siena, italy
model: 750 Paso
year: 1988
Brushes don't require to remove the starter to be changed. search in the forum how to work on it :)

_________________
have a nice ride, Nicola

Black "DUKE" 751582
ex...Red "smooth" 753349 :-(


Top
 Profile  
Reply with quote  
 Post subject: Re: 906 Paso Starter - UK
PostPosted: Sat Sep 01, 2012 12:25 pm 
Offline
User avatar

Joined: Wed Oct 06, 2004 12:00 am
Posts: 325
Location: Nottingham, UK
model: 906 Paso
year: 1989
To remove the starter you will have to take off the left side engine casing etc. To access the brushes only remove the oil cooler blank bolts and starter motor cap. I am fairly sure the 748 uses the same starter if it is really that bad, a common part.


Top
 Profile  
Reply with quote  
 Post subject: Re: 906 Paso Starter - UK
PostPosted: Sat Sep 01, 2012 1:47 pm 
Offline
paso grand pooh-bah
User avatar

Joined: Sun Aug 01, 2004 12:00 am
Posts: 1097
Location: siena, italy
model: 750 Paso
year: 1988
All L twins in Ducati use the same starter :)

_________________
have a nice ride, Nicola

Black "DUKE" 751582
ex...Red "smooth" 753349 :-(


Top
 Profile  
Reply with quote  
 Post subject: Re: 906 Paso Starter - UK
PostPosted: Mon Sep 03, 2012 11:16 am 
Offline

Joined: Wed Jun 20, 2012 12:13 pm
Posts: 10
Location: UK
model: 906 Paso
year: 1988
Thanks to all. It was a short on the internal cable connection straight onto the casing after it slipped round whilst connecting cable.

It seems from comments that most parts are common with other models, does this include ignition items, ignition key etc, as my manual does not show grey cable on switch but there is one.


Top
 Profile  
Reply with quote  
 Post subject: Re: 906 Paso Starter - UK
PostPosted: Mon Sep 03, 2012 12:45 pm 
Offline
paso grand pooh-bah
User avatar

Joined: Sun Jul 18, 2004 12:00 am
Posts: 5418
Location: southern Germany
model: 750 Paso
year: 1987
the wiring diagram shows a grey yellow (GRY) cable that runs to the left handle bar switch.
Numerous engine parts can be found on other Ducs. The Digiplex ignition is rather specific as is the ignition switch. The ignition switch from other Pasos will fit.

G.


Top
 Profile  
Reply with quote  
 Post subject: Re: 906 Paso Starter - UK
PostPosted: Mon Sep 03, 2012 6:56 pm 
Offline
paso grand pooh-bah
User avatar

Joined: Sun Aug 01, 2004 12:00 am
Posts: 1097
Location: siena, italy
model: 750 Paso
year: 1988
Similar digiplex ignitions were installed on Fiat and Lancia cars, but with a differend mapping. Ingition switch fron Cagiva Elefant can fit ;)

_________________
have a nice ride, Nicola

Black "DUKE" 751582
ex...Red "smooth" 753349 :-(


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: