Ignitech for 906?

discussions specific to the 906 Paso
Post Reply
koko64
Posts: 95
Joined: Sun Feb 24, 2013 11:14 pm
model: other
year: 1999
Location: Melbourne Australia

Ignitech for 906?

Post by koko64 »

Is there an Ignitech available to replace the Digiplex in case of unrepairable failure? Would one have to fit Kokusan type ignition pick ups and flywheel, or would it be plug and play?
2013 M1100 Evo Street
2004 GSXR750 Track
User avatar
ducbertus
paso grand pooh-bah
Posts: 531
Joined: Sun Jan 07, 2007 12:00 am
model: 907 I.E.
year: 1991
Location: holland

Re: Ignitech for 906?

Post by ducbertus »

Hi Koke,

maybe not ignitech, but maybe these guys: http://www.carmoelectronics.com.au/inde ... grnvhlpdl2


Bertus
koko64
Posts: 95
Joined: Sun Feb 24, 2013 11:14 pm
model: other
year: 1999
Location: Melbourne Australia

Re: Ignitech for 906?

Post by koko64 »

Cool. Thanks :thumbup:
2013 M1100 Evo Street
2004 GSXR750 Track
User avatar
stigonpaso
Posts: 56
Joined: Thu Jul 21, 2011 9:47 pm
model: 906 Paso
year: 1990
Location: Benicia, CA. USA.

Re: Ignitech for 906?

Post by stigonpaso »

I emailed Ignitch asking that very question and this was their reply:



Hello


There are two possibilities :



1) unit TCI (unprogrammable).

2) unit TCIP4 standard (programmable).



Both our unit do not contains sensor of inlet pressure (original unit it contains inside). But we think that this is possible run our unit on this bike without this sensor. We made this many times.
Unfortunately we have not original connector. You have cut original connector and to use another connector delivered with our unit.



What is your country ?



Regards.


IGNITECH
dave906
Posts: 32
Joined: Tue Apr 11, 2006 12:00 am
model: 906 Paso
year: 1990
Location: Canberra, Australia

Re: Ignitech for 906?

Post by dave906 »

Another one to try is Silent-Hektik in Germany. Haven't used the product myself but it seems to be a plug in replacement and they also offer coils and leads claiming improved performance over the standard items. You can use google translate to get more info from their mainly German web site.
They were quite responsive when I enquired in more detail some years ago.

http://www.silent-hektik.com/Duc_Digi.htm

http://www.silent-hektik.com/PB_DP_08.pdf
koko64
Posts: 95
Joined: Sun Feb 24, 2013 11:14 pm
model: other
year: 1999
Location: Melbourne Australia

Re: Ignitech for 906?

Post by koko64 »

Thanks.
I like the Ignitech. Set your own map for high compression pistons and fuel availability. Cool.
The water cooled 906 seems a good candidate for a high comp/big bore kit.
:thumbup:
2013 M1100 Evo Street
2004 GSXR750 Track
Post Reply