ducatipaso.org
http://forums.ducatipaso.org/

starter rebuild kit
http://forums.ducatipaso.org/viewtopic.php?f=2&t=7836
Page 1 of 2

Author:  Mc tool [ Sat Dec 02, 2017 5:28 pm ]
Post subject:  starter rebuild kit

anyone looking for starter brushes check this out
https://www.ebay.com/itm/Starter-Rebuil ... md&vxp=mtr
exactly the same as the Ducati one . There are brushes by them selves. I have just got two for my quad bike and after a quick look I put the brush plate beside a genuine ducati one and cant see the diff.

Author:  Derek [ Sun Dec 03, 2017 9:52 am ]
Post subject:  Re: starter rebuild kit

That's a great find there Hamish as it includes all the bearings bushes and o-rings as well as the brushes and backplate. Unfortunately it's in the US and by the time it gets here, it will have collected another £4.20 or so in duty + another £12 in admin fees, increasing the cost by about 150%. Still cheap I suppose. I can maybe find a UK supplier though.

Author:  Mc tool [ Sun Dec 03, 2017 5:47 pm ]
Post subject:  Re: starter rebuild kit

I actually got this one ( 2 )Its in China and 2 of them inc freight cost me us$18.98
https://www.ebay.com/itm/-/182493648119 ... n_NZ(en_AE)&cnac=NZ&mail=sys&e=op&unp_tpcid=email-receipt-auction-payment&ppid=PPX000608&calf=2d8d55e5d6600&calc=2d8d55e5d6600&pgrp=main:email&unptid=88a5a4a0-d58c-11e7-a401-441ea14e9560&mchn=em&t=&s=ci&page=main:email&cal=2d8d55e5d6600&cust=0P587438NL415322R. The kit from the states , all up is still less than 1/2 the price of the Ducati brush plate alone

Author:  Andrew2 [ Thu Jan 04, 2018 4:34 am ]
Post subject:  Re: starter rebuild kit

I was told the starter motor in my 84' MHR was the same as a Suzuki GN 450 and that kit looks suspiciously like the same set up. Anyone know for sure?.

Author:  Derek [ Thu Jan 04, 2018 9:37 am ]
Post subject:  Re: starter rebuild kit

I've seen a few MHRs but never one with an electric start!

Author:  Mc tool [ Thu Jan 04, 2018 9:04 pm ]
Post subject:  Re: starter rebuild kit

I think this starter is used in a lot of bikes , some have different mounts ( like the Ducati ) but the innards are the same , apparently fits a few kwaka's too
Maybe Andrew's Mhr has had a starter retro fitted . Would be a must for me as I cant even kick over my RD400 ( use the hand ...........which probly wouldn't work on a bevel Duke :P ) . I have a friend in Chch that fitted a starter to his bevel ( some how... lot of F Ab ) when he munted his foot .

Author:  900streetfighter [ Thu Jan 04, 2018 9:29 pm ]
Post subject:  Re: starter rebuild kit

CG 125 brushes fit with a couple of minutes filing.

Author:  Andrew2 [ Fri Jan 05, 2018 3:59 am ]
Post subject:  Re: starter rebuild kit

Mine's definitively got an electric start. 1984 model 900's and later Mille's came out with the electric starter.
Image

Image

Image

I bought my MHR new in '84 from the importer Fraser M/Cs so no retro fitting of the starter motor. They all had them. The one thing I did retro fit was a kick starter because the starter motor was so useless. Apparently Ian Gowanloch was selling some MHR's at the time that he put together out of bits and pieces but mine is definitively factory spec.

The bike in the photos is a Mille but the specs are the 900.
http://www.motorcyclespecs.co.za/model/ ... r%2083.htm


Cheers
Andrew

Author:  Derek [ Fri Jan 05, 2018 9:47 am ]
Post subject:  Re: starter rebuild kit

I knew the Mille had an electric start and while not doubting that your MHR does Andrew, I just checked in my Ducati books (Mick Walker & Ian Falloon) and see that the starter was only fitted for 1984, the last year of the MHR. Something that I must have known and long since forgotten. It is brilliant that you've had the bike since new, you will know every detail of its history.

Author:  Andrew2 [ Fri Jan 05, 2018 11:05 am ]
Post subject:  Re: starter rebuild kit

Yes, i went to a lot of places on the old girl when I was a bit more flexible :lol: . My wife and I did a 6,000km round trip to Cairns on one holiday. It were good simple times indeed.

I have heard that the electric start 900 MHR's weren't introduced into the UK but not sure if that was just a rumor or not. Ducati was on shakey ground back then so they did some funny things.

I just bought a new book that you may be interested in Derek.
Image

It's from England so free delivery in Britain.

I just noticed I had 2 photos the same but have added another now.

Cheers
Andrew

Author:  Derek [ Fri Jan 05, 2018 12:41 pm ]
Post subject:  Re: starter rebuild kit

I have a few of the Benzina magazine publications but at £35 that one's a little pricey :( Although if I had an MHR I'd probably buy it.

Author:  Andrew2 [ Fri Jan 05, 2018 7:17 pm ]
Post subject:  Re: starter rebuild kit

It's not cheap especially with the shipping to Australia. All these types of books seem to be pricey. It was a Christmas present from the family along with a bike lift.

Author:  Finnpaso [ Sun Feb 11, 2018 10:48 am ]
Post subject:  Re: starter rebuild kit

Hi all!

I DONT have 906, only 1xP750 and 3x907IE, so question: Does all Paso's have SAMEKIND starter??? I havent checked those very closely, even not from spare part catalogue. Maybe also ST2 have samekind, as 907IE?

Antti :thumbup:

Author:  Finnpaso [ Sun Feb 11, 2018 2:21 pm ]
Post subject:  Re: starter rebuild kit

I checked just, that 907IE, ST2 and ST4S have samekind starters and 750 Paso different one. But whatkind 906 have? P750 or 907IE model? My quess, is that, 906 and 907 have samekind :wacko:

Part numbers:
750 Paso / 067050800
907IE, ST2 and ST7S / 27040011A

750 Paso starter also looks different compared to 907IE (in spare part catalogues)

Antti

Author:  Finnpaso [ Sun Feb 11, 2018 3:41 pm ]
Post subject:  Re: starter rebuild kit

Mc tool wrote:
anyone looking for starter brushes check this out
https://www.ebay.com/itm/Starter-Rebuil ... md&vxp=mtr
exactly the same as the Ducati one . There are brushes by them selves. I have just got two for my quad bike and after a quick look I put the brush plate beside a genuine ducati one and cant see the diff.


Mc tool: How about those bearings etc other stuff in that package? I mean, did You use ONLY brushes with plate, OR all o-rings, bearings, etc ??? Does ALL parts fit to 906 starter?

Antti :thumbup:

Page 1 of 2 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/