It is currently Mon Jun 25, 2018 6:20 am

All times are UTC





Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Weber adjustment
PostPosted: Thu Jun 07, 2018 7:32 am 
Offline
User avatar

Joined: Fri Oct 27, 2017 1:47 pm
Posts: 21
Location: Czech Republic
model: 906 Paso
year: 1990
I can not set up Weber carburetor on 906 Paso :banghead: , please advice


Top
 Profile  
Reply with quote  
 Post subject: Re: Weber adjustment
PostPosted: Thu Jun 07, 2018 7:33 am 
Offline
paso grand pooh-bah
User avatar

Joined: Sun Jul 18, 2004 12:00 am
Posts: 5206
Location: southern Germany
model: 750 Paso
year: 1987
give us some more info. What's the problem?


Top
 Profile  
Reply with quote  
 Post subject: Re: Weber adjustment
PostPosted: Thu Jun 07, 2018 7:38 am 
Offline
User avatar

Joined: Fri Oct 27, 2017 1:47 pm
Posts: 21
Location: Czech Republic
model: 906 Paso
year: 1990
does not go well into the speed while riding, when I squeeze the clutch while driving and I take the gas, the engine goes out. Also, when taking gas, it shoots into the exhaust


Top
 Profile  
Reply with quote  
 Post subject: Re: Weber adjustment
PostPosted: Fri Jun 08, 2018 9:01 am 
Offline
paso grand pooh-bah
User avatar

Joined: Sun Jul 18, 2004 12:00 am
Posts: 5206
Location: southern Germany
model: 750 Paso
year: 1987
imo check everything around the carbs first. I.e. measure if the coils get the same voltage the battery has, check the rubber boots below the carbs for hairline cracks and verify there's also no leak air at the carb manifold/cylinder head connection. Then check valve clearances and if all that is ok have a look at the carbs float needle jet.


Top
 Profile  
Reply with quote  
 Post subject: Re: Weber adjustment
PostPosted: Mon Jun 11, 2018 6:56 am 
Offline
User avatar

Joined: Fri Oct 27, 2017 1:47 pm
Posts: 21
Location: Czech Republic
model: 906 Paso
year: 1990
Thank you, I'll try to check it out again


Top
 Profile  
Reply with quote  
 Post subject: Re: Weber adjustment
PostPosted: Mon Jun 11, 2018 8:48 am 
Offline
paso grand pooh-bah
User avatar

Joined: Sun Jul 18, 2004 12:00 am
Posts: 5206
Location: southern Germany
model: 750 Paso
year: 1987
while you're doing that also check if you still have the Y piece in the fuel line with the return hose to the tank. Not having that can cause the carb to overflow and also puts stress on the pump.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: