It is currently Wed Oct 16, 2019 9:22 am

All times are UTC





Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Sprocket cover interchangeable?
PostPosted: Tue Oct 01, 2019 1:55 am 
Offline

Joined: Wed Sep 25, 2019 6:37 am
Posts: 7
Location: Australia
model: 906 Paso
year: 1989
750 and 906 Pasos have different part numbers for this part.
But can one from a 750 fit a 906, or is there an important difference?


Top
 Profile  
Reply with quote  
 Post subject: Re: Sprocket cover interchangeable?
PostPosted: Tue Oct 01, 2019 10:59 pm 
Offline
paso grand pooh-bah
User avatar

Joined: Wed Dec 05, 2007 12:35 am
Posts: 1668
Location: Newzealand
model: 906 Paso
year: 1990
Some times the quickest way to find out is to go to good ole eBay ( or elsewhere ) and see if you can't view pix of parts for sale. I thing the 750 and the 906 motor are based on different crankcases so it probly is different

_________________
I wish I was young again............Id be heaps smarter than last time


Top
 Profile  
Reply with quote  
 Post subject: Re: Sprocket cover interchangeable?
PostPosted: Wed Oct 02, 2019 8:45 am 
Offline
paso grand pooh-bah
User avatar

Joined: Thu Nov 03, 2011 10:13 am
Posts: 670
Location: Scotland
model: 907 I.E.
year: 1994
The cover on the 500 and 600 Pantah engines are certainly different. I'd assume that the 750 Paso engine which is based on the Pantah engine is also different.

_________________
1994 907ie
2017 Supersport 939
2015 Scrambler Classic
1982 Pantah 500SL


Scotland


Top
 Profile  
Reply with quote  
 Post subject: Re: Sprocket cover interchangeable?
PostPosted: Wed Oct 02, 2019 4:34 pm 
Offline
paso grand pooh-bah
User avatar

Joined: Sun Jul 18, 2004 12:00 am
Posts: 5359
Location: southern Germany
model: 750 Paso
year: 1987
Quote:
750 and 906 Pasos have different part numbers for this part.

The reason being that the parts catalog only shows the 906 engine with the clutch slave piston on the left engine side. If you have an early 906 with the piston in the clutch cover the sprocket cover from a P750 will fit, as will the one from the 750 Supersport, Monster, Cagiva Elefant and probably some others.
There are different versions of the '750' sprocket cover. I.e. there is a longer version and one with cut out slots.

If your engine has the clutch slave cylinder on the left you can fit the sprocket cover from almost all later 900, 748, 916, ST2, ST3, ST4, SSie etc. There's a huge choice of aftermarket covers.


Top
 Profile  
Reply with quote  
 Post subject: Re: Sprocket cover interchangeable?
PostPosted: Sun Oct 06, 2019 9:02 am 
Offline

Joined: Wed Sep 25, 2019 6:37 am
Posts: 7
Location: Australia
model: 906 Paso
year: 1989
The Paso 906 here has the clutch slave cylinder on the right.
So, a Paso 750 sprocket cover should be OK.
Thank you for the info.


Top
 Profile  
Reply with quote  
 Post subject: Re: Sprocket cover interchangeable?
PostPosted: Tue Oct 08, 2019 11:19 am 
Offline
User avatar

Joined: Mon Mar 30, 2009 7:59 pm
Posts: 265
Location: Australia
model: 906 Paso
year: 1989
Jorian wrote:
The Paso 906 here has the clutch slave cylinder on the right.
So, a Paso 750 sprocket cover should be OK.
Thank you for the info.

A Paso 750 cover may not fit on the 906 engine. While the 906 has the slave cylinder fitted to the clutch cover it utilises the same engine cases as the 907 and 851 which have the slave cylinder on the left side. The 906 has a blank plate fitted on the left side instead of the slave cyl. and the sprocket cover is shaped to fit around the plate.


Top
 Profile  
Reply with quote  
 Post subject: Re: Sprocket cover interchangeable?
PostPosted: Tue Oct 08, 2019 3:58 pm 
Offline
paso grand pooh-bah
User avatar

Joined: Sun Jul 18, 2004 12:00 am
Posts: 5359
Location: southern Germany
model: 750 Paso
year: 1987
Ken, you're right. My bad.


Attachments:
s-l1600.jpg
s-l1600.jpg [ 159.2 KiB | Viewed 80 times ]
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


cron