907IE Radiator Hoses
-
- Posts: 95
- Joined: Fri May 28, 2010 10:49 am
- model: other
- year: 1986
Re: 907IE Radiator Hoses
I emailed the address given, belatedly (yesterday), re - the cost of these hoses. (I've been busy being sixty )
Any clue as to what is happening anyone?
Any clue as to what is happening anyone?
-
- Posts: 373
- Joined: Mon Apr 03, 2006 12:00 am
- model: 907 I.E.
- year: 1993
- Location: Northampton UK
Re: 907IE Radiator Hoses
Justr replied to you
Its moving albeit slowly !
Basically we have 10 confirmed and we need 10 more - I've posted in just about all the Ducati forums I can and am trying to get something into some of the mags (Classic Bike etc. through the letters pages).
There are a 5 or 6 more "possibles" but I kind of only rate them as a half a person as they may or may not commit when the time comes.
I'm also trying to tap up some of the "Ducati specialists" to convince them that having a set or two in stock would be a good move for them - no luck with that so far.
Unfortunately I have a finite amount of time to devote to this and that time is being spent trying to find more people who may not necessarily be on this board, as a result comms are a little light on the board for me at the moment.
I did spend quite a bit of time scratching around trying to find a better lhs hose than mine for SFS to work with as mine has a crimp in it where its sat next to the frame brace.
Comms will improve as we get a few more people interested.
Its moving albeit slowly !
Basically we have 10 confirmed and we need 10 more - I've posted in just about all the Ducati forums I can and am trying to get something into some of the mags (Classic Bike etc. through the letters pages).
There are a 5 or 6 more "possibles" but I kind of only rate them as a half a person as they may or may not commit when the time comes.
I'm also trying to tap up some of the "Ducati specialists" to convince them that having a set or two in stock would be a good move for them - no luck with that so far.
Unfortunately I have a finite amount of time to devote to this and that time is being spent trying to find more people who may not necessarily be on this board, as a result comms are a little light on the board for me at the moment.
I did spend quite a bit of time scratching around trying to find a better lhs hose than mine for SFS to work with as mine has a crimp in it where its sat next to the frame brace.
Comms will improve as we get a few more people interested.
-
- Posts: 95
- Joined: Fri May 28, 2010 10:49 am
- model: other
- year: 1986
Re: 907IE Radiator Hoses
Andy.
I fully appreciate all the time and effort you are putting onto this.
I have emailed you to confirm that I definitely want a set of hoses.
Good luck with getting the orders up to the minimum requirement.
Come on you waverers commit! You know it makes sense.
This is a one-of opportunity to acquire a set of quality hoses for our 907's.
I fully appreciate all the time and effort you are putting onto this.
I have emailed you to confirm that I definitely want a set of hoses.
Good luck with getting the orders up to the minimum requirement.
Come on you waverers commit! You know it makes sense.
This is a one-of opportunity to acquire a set of quality hoses for our 907's.
- Ducolaf
- Posts: 140
- Joined: Sun Mar 20, 2011 11:53 am
- model: 907 I.E.
- year: 1992
- Location: Eastern Netherlands
Re: 907IE Radiator Hoses
Perhaps you could mentioned this purchase item to other Pasoist on Facebook, as there are a few of them there too and the idea is more easily to be spread.
Check out https://www.facebook.com/groups/ducatipasoists/
Check out https://www.facebook.com/groups/ducatipasoists/
If you realy look you will see that the whole world is Ducati Red. . .
Proud owner of a;
- Ducati 907 ie 1992 in red
- Ducati 900 SSC Imola 1997 in red
- aprilia RST Mille Futura 2001 in infinity blue
- Alfa Romeo 159 SW 2007 in Grigrio Stromboli
Proud owner of a;
- Ducati 907 ie 1992 in red
- Ducati 900 SSC Imola 1997 in red
- aprilia RST Mille Futura 2001 in infinity blue
- Alfa Romeo 159 SW 2007 in Grigrio Stromboli
Re: 907IE Radiator Hoses
Hi Fella's.
I would be interested in a set of hoses for a 907ie. I'm out of Georgia USA.
Please keep us updated.
Cheers,
Tony
PS. This is my first post.
I would be interested in a set of hoses for a 907ie. I'm out of Georgia USA.
Please keep us updated.
Cheers,
Tony
PS. This is my first post.
-
- Posts: 83
- Joined: Sat Aug 18, 2007 12:00 am
- model: 907 I.E.
- year: 1992
- Location: Cleveland O.
Re: 907IE Radiator Hoses
I remembered LT at Desmo Times was looking to make a run of silicon hoses for the 907. I e-mailed to ask if he was still interested, he replied not enough interest he needed 10 to place an order. It looks like we have 10 people interested now. This looks like a better way to go.
- higgy
- paso grand pooh-bah
- Posts: 3328
- Joined: Tue Jul 29, 2008 9:50 pm
- model: 907 I.E.
- year: 1992
- Location: Hilltown,Pennsylvania
- Contact:
Re: 907IE Radiator Hoses
I was on LT's list then he got called to active duty
Ducati,making mechanics out of riders since 1946
There's no problem so bad that a little fixing can't make it worse! : )
If it ain't broke keep fixin it till it is
88 750
90 906
92 907ie
There's no problem so bad that a little fixing can't make it worse! : )
If it ain't broke keep fixin it till it is
88 750
90 906
92 907ie
-
- Posts: 373
- Joined: Mon Apr 03, 2006 12:00 am
- model: 907 I.E.
- year: 1993
- Location: Northampton UK
Re: 907IE Radiator Hoses
Guys
I'm really not precious about this in the slightest. If you have another supplier that will work with a lower minimum then hell lets go for it.
It could take some time to generate more interest in this over and above who's "spectating" at the moment !
I have absolutely no vested interest in this apart from the fact I know at some point I will need new hoses for my bike - I have no plans to sell it ever so its worth doing.
I've got a reasonable set of pattern hoses now to copy from too so that helps and I'm happy to loan those where ever needed.
As they are probbably porous as well we can get round the duty issues of moving them globally too.
I'm really not precious about this in the slightest. If you have another supplier that will work with a lower minimum then hell lets go for it.
It could take some time to generate more interest in this over and above who's "spectating" at the moment !
I have absolutely no vested interest in this apart from the fact I know at some point I will need new hoses for my bike - I have no plans to sell it ever so its worth doing.
I've got a reasonable set of pattern hoses now to copy from too so that helps and I'm happy to loan those where ever needed.
As they are probbably porous as well we can get round the duty issues of moving them globally too.
-
- Posts: 17
- Joined: Tue Oct 30, 2012 12:55 pm
- model: 907 I.E.
- year: 1992
- Location: SW Scotland
Re: 907IE Radiator Hoses
Put me down for a set.
I may have sent a direct e-mail but can't remember.
Robbie
I may have sent a direct e-mail but can't remember.
Robbie
Re: 907IE Radiator Hoses
Aprillia 1000 thermostat works well and has better temp stability. See tec FAQ for picture
Re: 907IE Radiator Hoses
Andy: Any update on the hose project? Still in for a set or two.
Thanks
Mac
Thanks
Mac
-
- Posts: 373
- Joined: Mon Apr 03, 2006 12:00 am
- model: 907 I.E.
- year: 1993
- Location: Northampton UK
Re: 907IE Radiator Hoses
Hi guys
Sorry been a bit slow to update.
Basically we're still short so I'm talking to some other manufacturers to see if they'll do a smaller run
I'm also talking to a couple of dealers to see if they'll go in for a couple of sets for stock.
Most of the dealers didn't really want to talk until after christmas so that's this months challenge.
Sorry been a bit slow to update.
Basically we're still short so I'm talking to some other manufacturers to see if they'll do a smaller run
I'm also talking to a couple of dealers to see if they'll go in for a couple of sets for stock.
Most of the dealers didn't really want to talk until after christmas so that's this months challenge.
-
- Posts: 157
- Joined: Mon Dec 02, 2013 2:31 pm
- model: 907 I.E.
- year: 1993
- Location: winston salem, nc usa
Re: 907IE Radiator Hoses
you can put me down for a set please and depending on price maybe two! Lots of 907's. Thanks Arch.
- Bock900r
- Posts: 153
- Joined: Tue Sep 07, 2010 1:33 am
- model: 907 I.E.
- year: 1991
- Location: Hamburg/Germany Novi/Michigan
Re: 907IE Radiator Hoses
I would take 2 set
Rüdiger
__________
84 GPZ 900R
84 GPZ 900R
86 GPZ 900R
88 GPZ 900R
888 SP4
907ie Black
907ie Red
907 evo (project)
998 Matrix
998s FE
V50 Monza
MV Agusta 750 Evo2
ZXR750RR-K
ZXR750RR-M
__________
84 GPZ 900R
84 GPZ 900R
86 GPZ 900R
88 GPZ 900R
888 SP4
907ie Black
907ie Red
907 evo (project)
998 Matrix
998s FE
V50 Monza
MV Agusta 750 Evo2
ZXR750RR-K
ZXR750RR-M
-
- Posts: 373
- Joined: Mon Apr 03, 2006 12:00 am
- model: 907 I.E.
- year: 1993
- Location: Northampton UK
Re: 907IE Radiator Hoses
Guys if you haven't emailed me on the address in this thread can you do so please and include your user I'd as well please so I can tie it all back.