Radiator Coolant Flush

discussions specific to the 907IE
Post Reply
caryboat1
Posts: 5
Joined: Tue Jan 14, 2014 9:45 pm
model: 907 I.E.
year: 1992
Location: USA

Radiator Coolant Flush

Post by caryboat1 »

Could someone give me the procedures to change out the coolant

I opened the lower left hose from the radiator and the coolant was like black water and I want to change as it is is running hot.

I just can t figure out how to refill? the forum says u can not refill through expansion tank?

Then How?

thx

Kevin
Mc tool
paso grand pooh-bah
Posts: 1878
Joined: Wed Dec 05, 2007 12:35 am
model: 906 Paso
year: 1990
Location: Newzealand

Re: Radiator Coolant Flush

Post by Mc tool »

There is a drain screw under the front cyl ( looks like a 6mm cap screw ... with a copper washer ) , and one on the waterpump cover . I usually just fill mine thru the tank ..... long as your not in a hurry. If I had black water in my cooling system I want to at least put a flush thru it , makes me think there has been some sort of electrollisis going on in there , or maybe the hoses are rotting from the inside out , but either way id look into that.
Hamish
I wish I was young again............Id be heaps smarter than last time
caryboat1
Posts: 5
Joined: Tue Jan 14, 2014 9:45 pm
model: 907 I.E.
year: 1992
Location: USA

Re: Radiator Coolant Flush

Post by caryboat1 »

Thanks
Post Reply