907 back to life...almost

discussions specific to the 907IE
Post Reply
MG907
Posts: 3
Joined: Sat Jun 18, 2016 7:20 pm
model: 907 I.E.
year: 1991
Location: USA

907 back to life...almost

Post by MG907 »

IMG_201608215_050147 (608x640).jpg
IMG_201608215_050147 (608x640).jpg (231.79 KiB) Viewed 3334 times
Hello everyone,

Finally up and running after rebuilding the gas tank and starter, new voltage regulator, fix the crankcase leak on the bottom, clean, paint, grease everything from the shock back, new chain, new clutch slave cylinder, rebuilt clutch master cylinder, bead blast and paint exhaust.

And now I'm getting 12.54v at idle and 12.89v at higher rpm, is this enough? Any suggestions... only thing left is the stator, is it time to replace it? It has a new glass mat battery.

,Mike
User avatar
higgy
paso grand pooh-bah
Posts: 3325
Joined: Tue Jul 29, 2008 9:50 pm
model: 907 I.E.
year: 1992
Location: Hilltown,Pennsylvania
Contact:

Re: 907 back to life...almost

Post by higgy »

If you are lucky its just the connector
Ducati,making mechanics out of riders since 1946
There's no problem so bad that a little fixing can't make it worse! : )
If it ain't broke keep fixin it till it is
88 750
90 906
92 907ie
Post Reply