It is currently Thu Dec 14, 2017 12:43 am

All times are UTC





Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Swing Arm for 1992 907ie
PostPosted: Sat Sep 03, 2016 12:36 pm 
Offline

Joined: Tue Apr 23, 2013 9:33 pm
Posts: 52
Location: Austin, Texas
model: 907 I.E.
year: 1992
Hello Group I had a low level disaster on my 1992 907ie. One of the rear sproket mounting bolts came loose and gave quite a trek to my swing arm on the left side destroying the axel adjuster, I bought one on FleaBay but although it looked good in pictures, in person it's too chewed up to use. Does anyone in the group know anyone parting out a 907ie, or is there another model Ducati rear swing arm which is similar?

Any help appreciated
Russell Brown
profmed9@yahoo.com


Top
 Profile  
Reply with quote  
 Post subject: Re: Swing Arm for 1992 907ie
PostPosted: Sat Sep 03, 2016 12:50 pm 
Offline
paso grand pooh-bah

Joined: Thu Jun 21, 2007 12:00 am
Posts: 1421
Location: Gothenburg, SWEDEN
model: 907 I.E.
year: 1991
Swing uniqe for 907.

This look weldable: http://www.ebay.com/itm/ducati-Paso-907 ... 3f64a54ff0

_________________
Gert

907 I.E. -91
M900 -97


Top
 Profile  
Reply with quote  
 Post subject: Re: Swing Arm for 1992 907ie
PostPosted: Sat Sep 03, 2016 2:28 pm 
Offline

Joined: Tue Apr 23, 2013 9:33 pm
Posts: 52
Location: Austin, Texas
model: 907 I.E.
year: 1992
That's the best one I have seen on EBay. I bought one but it's chewed up in the rear. I got a response from Duc-only.nl. I'll see what he has. Someone said the sproket bolts can saw the swing arm in half. I see what he means. I'm investing in some loctite after this. Thanks for the help

Russell


Top
 Profile  
Reply with quote  
 Post subject: Re: Swing Arm for 1992 907ie
PostPosted: Sat Sep 03, 2016 10:48 pm 
Offline
paso grand pooh-bah
User avatar

Joined: Tue Jul 29, 2008 9:50 pm
Posts: 3159
Location: Hilltown,Pennsylvania
model: 906 Paso
year: 1990
shoot me a pm

_________________
Ducati,making mechanics out of riders since 1946
There's no problem so bad that a little fixing can't make it worse! : )
If it ain't broke keep fixin it till it is
88 750
90 906
92 907ie


Top
 Profile  
Reply with quote  
 Post subject: Re: Swing Arm for 1992 907ie
PostPosted: Sun Sep 04, 2016 1:52 pm 
Offline

Joined: Tue Apr 23, 2013 9:33 pm
Posts: 52
Location: Austin, Texas
model: 907 I.E.
year: 1992
I found a Very Nice used swing arm from Rudy at Duc-Only in the Netherlands. All the ones I have seen on EBay are damaged in the back. I guess a good piece of Paso advice would be to check your sprocket bolts regularly, use Loctite and/or safety wire, check Axel bolts often and chain tension. Many of the swing arms I have looked at have chain scars. Owning a Paso is a learning experience. If you are as big a Klutz as I am, the Tuition is High. But I Love my Duc. I am a confirmed Paso-adictacus.

Thank all for comments and advice
Rusell


Top
 Profile  
Reply with quote  
 Post subject: Re: Swing Arm for 1992 907ie
PostPosted: Sun Sep 04, 2016 2:19 pm 
Offline
paso grand pooh-bah
User avatar

Joined: Sun Jul 18, 2004 12:00 am
Posts: 5103
Location: southern Germany
model: 750 Paso
year: 1987
also always check that the conical spacer between the swingarm and sprocket carrier is installed correctly with its wider side outwards! You need to check this everytime someone removes and installs the rear wheel.

G.


Top
 Profile  
Reply with quote  
 Post subject: Re: Swing Arm for 1992 907ie
PostPosted: Mon Sep 05, 2016 4:14 am 
Offline
paso grand pooh-bah
User avatar

Joined: Sat Sep 03, 2005 12:00 am
Posts: 1313
Location: SF Bay Area
model: 750 Sport
year: 1990
I have a good spare one if you still need one.
Yes, watch those sprocket bolts.

Cheers, Phil

_________________
Duc in the Bay
1990 750 Sport x2-Rosso Blanko (900ss copy) & Nuovo Nudo (Scrambler project)
1991 907 -mostly stock
2002 ST4s - Lots of mods.


Top
 Profile  
Reply with quote  
 Post subject: Re: Swing Arm for 1992 907ie
PostPosted: Thu Dec 29, 2016 6:14 am 
Offline

Joined: Tue Apr 23, 2013 9:33 pm
Posts: 52
Location: Austin, Texas
model: 907 I.E.
year: 1992
I found a nice swing arm from a Chap in Belgium. Before I bought the nice one, I bought a slightly bunged up one, but bought the nicer one because I am too lazy to fix the bunged one. If anyone wants a only slightly bunged up swingarm in the back on the sprocket side I would part with it for a nominal fee. Pics upon request.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: