It is currently Mon Aug 21, 2017 7:39 pm

All times are UTC





Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Merry Christmas Cam Belts
PostPosted: Sun Dec 25, 2016 8:03 pm 
Offline

Joined: Sun Aug 14, 2016 11:06 pm
Posts: 29
Location: USA
model: 907 I.E.
year: 1992
Merry Christmas everyone........heres what I did.....
Nice warm, clean room and new belts.....
Image
An hour later...(40 minutes just on bodywork;-)
Image

_________________
92 907 i.e.
2001 MG Jackal
1980 XS Eleven
1980 XS 850


Top
 Profile  
Reply with quote  
 Post subject: Re: Merry Christmas Cam Belts
PostPosted: Sun Dec 25, 2016 8:08 pm 
Offline

Joined: Sun Aug 14, 2016 11:06 pm
Posts: 29
Location: USA
model: 907 I.E.
year: 1992
Another hour and I was good with new belts on.......
Thought I would check the air cleaner while I was in....not knowing what the PO had done..
Found a K&N filter in there however, it covers half the intake holes in the cover.....thought it might be upside down, no, wont fit.....dont know whats up with that....anyone?
I was going to put a couple holes in the cover but dont want to ruin a stock part.....I did this on the Guzzi and it helped.......
Anyone else have this?

_________________
92 907 i.e.
2001 MG Jackal
1980 XS Eleven
1980 XS 850


Top
 Profile  
Reply with quote  
 Post subject: Re: Merry Christmas Cam Belts
PostPosted: Mon Dec 26, 2016 7:22 am 
Offline

Joined: Fri May 01, 2015 9:31 pm
Posts: 57
Location: Australia
model: 907 I.E.
year: 1991
Does the bike like listening to sweet tunes on the radio?


Top
 Profile  
Reply with quote  
 Post subject: Re: Merry Christmas Cam Belts
PostPosted: Mon Dec 26, 2016 9:35 am 
Offline
paso grand pooh-bah
User avatar

Joined: Sun Jul 18, 2004 12:00 am
Posts: 5084
Location: southern Germany
model: 750 Paso
year: 1987
Rudy might have a spare 907ie airbox lid and a set of snorkels. info@duc-only.nl

what numbers does your K&N filter have?
There are three that theoretically fit.

33-2003 Product Specifications
Product Style: Panel Air Filter
Height: 1.563 in (40 mm)
Outside Length: 8.25 in (210 mm)
Outside Width: 8.125 in (206 mm)

DU-0900 Product Specifications (DU-0900 replaced the old 33-2566)
Product Style: Panel Air Filter
Height: 0.75 in (19 mm)
Outside Length: 8.5 in (216 mm)
Outside Width: 8.375 in (213 mm)

DU-9098 Product Specifications
Product Style: Panel Air Filter
Height: 1.188 in (30 mm)
Outside Length: 8.25 in (210 mm)
Outside Width: 8.25 in (210 mm)

The middle one is the one for Ducati. The last one can also be used but may cover a bit of the intake holes. The first should only be used with a completely cut open airbox lid or the alu frame which could be bought as replacement of the lid. (The frame is not a spacer) With completely open lid the chip will have to be reprogrammed.


Attachments:
halterahmen-2_big.jpg
halterahmen-2_big.jpg [ 30.02 KiB | Viewed 351 times ]
Top
 Profile  
Reply with quote  
 Post subject: Re: Merry Christmas Cam Belts
PostPosted: Mon Dec 26, 2016 9:39 pm 
Offline

Joined: Sun Aug 14, 2016 11:06 pm
Posts: 29
Location: USA
model: 907 I.E.
year: 1992
Thanks, G. I have the 33-2003. I'll check with the local Ducati shop tomorrow....

_________________
92 907 i.e.
2001 MG Jackal
1980 XS Eleven
1980 XS 850


Top
 Profile  
Reply with quote  
 Post subject: Re: Merry Christmas Cam Belts
PostPosted: Mon Dec 26, 2016 9:41 pm 
Offline

Joined: Sun Aug 14, 2016 11:06 pm
Posts: 29
Location: USA
model: 907 I.E.
year: 1992
Bluey wrote:
Does the bike like listening to sweet tunes on the radio?

Nothing like a warm shop, a bike and blues on a Bose......well, and a pint.....

_________________
92 907 i.e.
2001 MG Jackal
1980 XS Eleven
1980 XS 850


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: