New 907ie paso owner

discussions specific to the 907IE
User avatar
paso750
paso grand pooh-bah
Posts: 5558
Joined: Sun Jul 18, 2004 12:00 am
model: 750 Paso
year: 1987
Location: southern Germany

Re: New 907ie paso owner

Post by paso750 »

It's great that you're rescuing this bike. It looked sad in the ad ... and that taillight :banghead:
Could you please post a close-up picture of the rear end of that frame?
I know two frames for the Paso, the long and the short one. The short one had alloy spacers between the frame and the rear grab handle. I've never seen one that looks like yours.
vainika
Posts: 16
Joined: Wed Jun 13, 2018 11:03 am
model: 907 I.E.
year: 1992
Location: Finland

Re: New 907ie paso owner

Post by vainika »

Here are a few pictures of the rear of the frame.

Image
Image
Image
User avatar
paso750
paso grand pooh-bah
Posts: 5558
Joined: Sun Jul 18, 2004 12:00 am
model: 750 Paso
year: 1987
Location: southern Germany

Re: New 907ie paso owner

Post by paso750 »

Thank you. :thumbup: I found pictures of other 907IE frames and they all look like this. In all the years I never realized that the rear of the 907IE frame was different. P750 & 906 also don't have the kink in the lower frame tube.
vainika
Posts: 16
Joined: Wed Jun 13, 2018 11:03 am
model: 907 I.E.
year: 1992
Location: Finland

Re: New 907ie paso owner

Post by vainika »

Hello :)
The engine is in one piece after ten years. :)

Image
vainika
Posts: 16
Joined: Wed Jun 13, 2018 11:03 am
model: 907 I.E.
year: 1992
Location: Finland

Re: New 907ie paso owner

Post by vainika »

Hello :)

Small upgrade from the project.

Image
Image
Image
vainika
Posts: 16
Joined: Wed Jun 13, 2018 11:03 am
model: 907 I.E.
year: 1992
Location: Finland

Re: New 907ie paso owner

Post by vainika »

HI

Can anyone say what the dimensions of the Pasos swingarm bolt are?
I noticed when I went through the parts that the bolt and the nut were missing. :dunno:

Otherwise the project has advanced well with engine assembly :thumbup:

Down a couple of pictures

Image
Image
Image
[imghttp://kuvanjako.fi/mygv3.jpg][/img]
Image
Duc77
Posts: 15
Joined: Wed Jul 25, 2018 12:01 pm
model: 907 I.E.
year: 1991
Location: Spain

Re: New 907ie paso owner

Post by Duc77 »

Hi Vainika, just saw your post...Did you resolve the supports of the ECU? i just bought a couple on a Ducati dealer.
Easy to find it.

Bye.
User avatar
englishstiv
paso grand pooh-bah
Posts: 1111
Joined: Wed Apr 09, 2008 9:57 pm
model: 907 I.E.
year: 1992
Location: Manchester, England.

Re: New 907ie paso owner

Post by englishstiv »

DUCATI 907ie 1992
HARLEY DAVIDSON ELECTRA GLIDE CLASSIC 1991
vainika
Posts: 16
Joined: Wed Jun 13, 2018 11:03 am
model: 907 I.E.
year: 1992
Location: Finland

Re: New 907ie paso owner

Post by vainika »

Hello

Updated project after a long time. :)

I found a rear fender that was missing from me.
It solved the ECM mortgage problem.
I also found a rear swing attachment bolt.

The engine cylinders I have put together with new pistons and rings.
I just got the cylindersheads back from the machine shop. They exchanged the inlet valve guides and the machined valves and valves seats.

I also noticed the intake valves had been replaced in biger ones 44mm and also noticed the exhaust and intake channels has been ported.

I will tell you again when the project is progressing :D

Down a couple of pictures

Image
Image
Image
Image
Image
Image
vainika
Posts: 16
Joined: Wed Jun 13, 2018 11:03 am
model: 907 I.E.
year: 1992
Location: Finland

Re: New 907ie paso owner

Post by vainika »

Hello!

Year has been spent on the project and the engine has been fixed to the chassis after 10 years.

Now just to reassemble and refurbish the other parts.

Image

Image

Image

Image

Image
Post Reply