ducatipaso.org
http://forums.ducatipaso.org/

Paso production numbers
http://forums.ducatipaso.org/viewtopic.php?f=8&t=187
Page 2 of 2

Author:  DucSoup [ Sat May 21, 2005 1:02 am ]
Post subject:  Re: Paso production numbers

fasterdammit wrote:
(The book differentiates between non-California-spec models and California-spec models, frame numbers of each at the bottom)


Okay history buffs, can anyone explaing the difference in California spec bikes visa vis the non-CA ones? This isn't a trick question - I really do not know.

Thanks for any clues.

Author:  Skins [ Sat May 21, 2005 5:53 am ]
Post subject: 

:cool:

I think it's to do with emission controls.

Author:  mike [ Sat May 21, 2005 5:49 pm ]
Post subject: 

Skins wrote:
:cool:

I think it's to do with emission controls.



ding ding ding!!! winnah!

Author:  DucSoup [ Sat May 21, 2005 7:57 pm ]
Post subject: 

My blu duc ain't got no stinkin emissions. It'll probably feel right at home outside California. :cool:

(Once I get it running that is)

Author:  Skins [ Sat May 21, 2005 7:58 pm ]
Post subject: 

:thumbup:


Thanks, Mike.

Nearly at 600, eh? How many do you reckon we can get to? Around 1000? Any idea how we are doing compared to other 'one model' groups, or are the figures too hard to find?

Author:  DucatiDan [ Mon Nov 21, 2005 1:33 am ]
Post subject: 

Yes it is polution control, I have three Paso's and the California one has an extra hose coming from the top, I believe the cam cover. it has been awhile since I had that tank off to look there. My British model has none of that stuff plus no extra hole for the hose. It is also noticeably quicker.

Author:  mike [ Mon Nov 21, 2005 6:38 am ]
Post subject: 

i removed all that junk from my bike a long time ago.

Author:  foxterrier [ Mon Jan 01, 2007 4:03 pm ]
Post subject: 

Interesting at all...
My red 906 has 000199 serial, but both european and american vin-numbers... What the heck that vehicle might be, any ideas???

Author:  Finnpaso [ Mon Jan 01, 2007 5:50 pm ]
Post subject: 

Easy to send USA or keep in Europe for selling. I think it was normal in those times, cause very many 750 Pasos came back to Europe markets from USA... :evil: factory was repared for that in 906 case... MAYBE! :funny:

Author:  du907 [ Thu Sep 17, 2009 11:42 pm ]
Post subject:  Re: Paso production numbers

I now see the answer to question I have had for about a year. . . . I have an "uprated" 1992 red 907.
I had may motor rebuilt last year and the mechanic called and asked if I had had my heads done on the bike. I told him I had it since new and no, I have never had any engine work done on the bike. The mechanic said that in all his years and bikes worked on, he had never seen a set of heads that look like these from the factory. Reading this post about the "uprated" bikes, this answers the question. Vin # ZDM1MB4P4NB######
du907

Image

Image

Author:  du907 [ Tue Nov 10, 2009 3:32 am ]
Post subject:  Re: Paso production numbers

After reading the posts above, does anyone have more information on the "uprated" versions that where made from the factory?

Author:  bobst2 [ Mon Oct 10, 2011 3:46 pm ]
Post subject:  Re: Paso production numbers

i think my 88 blue 750 paso must be a late production it,s frame # 754309 seems very high for the low production #,s. i am pretty sure cal,spec it has crankcase polution stuff & my wireing board looks more like a 906 with the digiplex ignition.
pretty much exactly the same as higgy,s 906 shown in the underseat electrics
thread on the site

Author:  Tamburinifan [ Mon Oct 10, 2011 7:53 pm ]
Post subject:  Re: Paso production numbers

Quote:
The mechanic said that in all his years and bikes worked on, he had never seen a set of heads that look like these from the factory.


From what I`ve read, there was some porting done.
Not so very good job is the verdict.

Author:  carart66 [ Sun Jul 23, 2017 5:36 am ]
Post subject:  Re: Paso production numbers

Hello all. I have posted a while back, but on another DUCATIPASO.ORG page. Anyways, I recently bought (Apr. 2017) an 88 750 Paso. 33,000 and some change on milage. A ton of paperwork, title, and some history on all the upgrades like the Delorto carbs, Cobra slip ons, etc. One thing I am trying to get nailed down is the production number of my bike. Frame number ...753769. I have the 4 Gold valve caps. I believe the numbers were only 50 built. of the 50, mine also seems to be the Non Cal. US. Can anyone help me there. I live, and bought it in Texas. I am not sure, but was told it may have come shipped in Houston, where it was bought. Last time it was titled was 1997, and only 19 miles on it since, so yea... alot of work, but I have ridden it, howbeit around the block after cleaning tank, lines carbs, etc. Now... no go. Not sure if clutch, or master. I did some of what has been posted, now I have some good grab in the clutch lever, but still going almost nowhere. Some suggestions? would like to get it ready for some retro bike shows. Thanks, Robert.

Author:  paso750 [ Sun Jul 23, 2017 8:27 am ]
Post subject:  Re: Paso production numbers

Quote:
another DUCATIPASO.ORG

:?:

Robert, for technical issues please post in the P750 forum with some more details about what's wrong.

Page 2 of 2 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/