Anyone converted to Dzus'
- 21783mike
- Posts: 102
- Joined: Thu Aug 28, 2008 9:48 am
- model: 750 Paso
- year: 1987
- Location: Smithsburg, MD
Anyone converted to Dzus'
Just thinking.... might convert to Dzus' but I'd like to see what it would look like 1st. Anyone done it and have pictures?
Mike B.
08 HYM 1100S
06 800SS
89 KLR650
87 750 Paso LTD
64 125 Bronco
08 HYM 1100S
06 800SS
89 KLR650
87 750 Paso LTD
64 125 Bronco
- paso750
- paso grand pooh-bah
- Posts: 5558
- Joined: Sun Jul 18, 2004 12:00 am
- model: 750 Paso
- year: 1987
- Location: southern Germany
Re: Anyone converted to Dzus'
I thought of it once but after seeing this picture I changed my mind again
- higgy
- paso grand pooh-bah
- Posts: 3329
- Joined: Tue Jul 29, 2008 9:50 pm
- model: 907 I.E.
- year: 1992
- Location: Hilltown,Pennsylvania
- Contact:
Re: Anyone converted to Dzus'
I went as far as to buy a set,but even tho the screws are a pain in the arse they do look good
Ducati,making mechanics out of riders since 1946
There's no problem so bad that a little fixing can't make it worse! : )
If it ain't broke keep fixin it till it is
88 750
90 906
92 907ie
There's no problem so bad that a little fixing can't make it worse! : )
If it ain't broke keep fixin it till it is
88 750
90 906
92 907ie
- mike
- paso grand pooh-bah
- Posts: 581
- Joined: Thu May 06, 2004 12:00 am
- model: 750 Paso
- year: 1988
- Location: NorCal
- Contact:
Re: Anyone converted to Dzus'
i believe that dzus fasteners don't have enough 'give' and will eventually stress crack the fibreglass
- ducbertus
- paso grand pooh-bah
- Posts: 531
- Joined: Sun Jan 07, 2007 12:00 am
- model: 907 I.E.
- year: 1991
- Location: holland
Re: Anyone converted to Dzus'
I've done a Dzus job on my Hailwood replica. but not the piercing like hangers.
I used normal slotted ones. In the DZUS catalog at that I saw also allen nut heads. If I do the job once again I would go for the allen heads.
lenght of the fasteners can be ordered in ssteps of 2 or 3 mm.
No, they as far no so forgiving as the wellnuts.
benefit of the DZUS is clear. I could all the plastic incl. tank and seat within 5 min. on the Hailwood replica.
Bertus
I used normal slotted ones. In the DZUS catalog at that I saw also allen nut heads. If I do the job once again I would go for the allen heads.
lenght of the fasteners can be ordered in ssteps of 2 or 3 mm.
No, they as far no so forgiving as the wellnuts.
benefit of the DZUS is clear. I could all the plastic incl. tank and seat within 5 min. on the Hailwood replica.
Bertus