swingarm chain slider
Re: swingarm chain slider
Anyone interested to do a run of the small chain sliders?
- Bock900r
- Posts: 153
- Joined: Tue Sep 07, 2010 1:33 am
- model: 907 I.E.
- year: 1991
- Location: Hamburg/Germany Novi/Michigan
Re: swingarm chain slider
paso750 wrote:looking good. If the width is 28mm and the total length ca.22,7cm it should be right.
around 226mm long, 28mm width
Rüdiger
__________
84 GPZ 900R
84 GPZ 900R
86 GPZ 900R
88 GPZ 900R
888 SP4
907ie Black
907ie Red
907 evo (project)
998 Matrix
998s FE
V50 Monza
MV Agusta 750 Evo2
ZXR750RR-K
ZXR750RR-M
__________
84 GPZ 900R
84 GPZ 900R
86 GPZ 900R
88 GPZ 900R
888 SP4
907ie Black
907ie Red
907 evo (project)
998 Matrix
998s FE
V50 Monza
MV Agusta 750 Evo2
ZXR750RR-K
ZXR750RR-M
Re: swingarm chain slider
Hi RudigerBock900r wrote:around 226mm long, 28mm width
Looks great , those measurements correspond to what I had drawn up. I have emailed you 2 pdf files with most of the measurements for you to verify. I'm not sure why the scale changed when I changed the file to STL format but it looks like you have it under control anyway. I will have a play around with the software and see if I can make any sense of it.
Thanks again.
Re: swingarm chain slider
Got it worked out. When I saved it to a STL file the settings were in centimeters when they should have been in millimeters, thats why you had to scale it up by 10.Bock900r wrote:I was busy all weeks with our Metal machines and looked on Friday to the file - It was so small. I scale the part by factor 10 and a kolleg build me one in Black PA11
I am not shure that the Dimention is right
-
- Posts: 157
- Joined: Mon Dec 02, 2013 2:31 pm
- model: 907 I.E.
- year: 1993
- Location: winston salem, nc usa
Re: swingarm chain slider
Regarding the small center stand chain sliders, I could use several depending on price, lots of Paso's Thanks Arch.
- Bock900r
- Posts: 153
- Joined: Tue Sep 07, 2010 1:33 am
- model: 907 I.E.
- year: 1991
- Location: Hamburg/Germany Novi/Michigan
Re: swingarm chain slider
With the STL for the little slider, I can make a lot, basicly for the cost of the shipping
I don't know the lifetime of these material with the chain in contact.
I must only build something on a Plastic machine, I am at the moment more working on the Metal machines
I don't know the lifetime of these material with the chain in contact.
I must only build something on a Plastic machine, I am at the moment more working on the Metal machines
Rüdiger
__________
84 GPZ 900R
84 GPZ 900R
86 GPZ 900R
88 GPZ 900R
888 SP4
907ie Black
907ie Red
907 evo (project)
998 Matrix
998s FE
V50 Monza
MV Agusta 750 Evo2
ZXR750RR-K
ZXR750RR-M
__________
84 GPZ 900R
84 GPZ 900R
86 GPZ 900R
88 GPZ 900R
888 SP4
907ie Black
907ie Red
907 evo (project)
998 Matrix
998s FE
V50 Monza
MV Agusta 750 Evo2
ZXR750RR-K
ZXR750RR-M
Re: swingarm chain slider
Bock900r wrote:With the STL for the little slider, I can make a lot, basicly for the cost of the shipping
I don't know the lifetime of these material with the chain in contact.
Better than nothing.
I'd take 3.
Re: swingarm chain slider
a330us wrote:Regarding the small center stand chain sliders, I could use several depending on price, lots of Paso's Thanks Arch.
But no photos
Re: swingarm chain slider
The STL file for the small one is on it's way, I'd be happy to test them out.Bock900r wrote:With the STL for the little slider, I can make a lot, basicly for the cost of the shipping
I don't know the lifetime of these material with the chain in contact.
I must only build something on a Plastic machine, I am at the moment more working on the Metal machines
- Bock900r
- Posts: 153
- Joined: Tue Sep 07, 2010 1:33 am
- model: 907 I.E.
- year: 1991
- Location: Hamburg/Germany Novi/Michigan
Re: swingarm chain slider
I give the file to a friend, he will build me some Hnad Full of the small one and some more from the swingarm slider. Just tae some time, I fly home for vacation
Rüdiger
__________
84 GPZ 900R
84 GPZ 900R
86 GPZ 900R
88 GPZ 900R
888 SP4
907ie Black
907ie Red
907 evo (project)
998 Matrix
998s FE
V50 Monza
MV Agusta 750 Evo2
ZXR750RR-K
ZXR750RR-M
__________
84 GPZ 900R
84 GPZ 900R
86 GPZ 900R
88 GPZ 900R
888 SP4
907ie Black
907ie Red
907 evo (project)
998 Matrix
998s FE
V50 Monza
MV Agusta 750 Evo2
ZXR750RR-K
ZXR750RR-M
- Bock900r
- Posts: 153
- Joined: Tue Sep 07, 2010 1:33 am
- model: 907 I.E.
- year: 1991
- Location: Hamburg/Germany Novi/Michigan
Re: swingarm chain slider
I found a noon running machine today in our Office , load 2 large slider and around 60 small chain Slider into the machine
There was white Nylon12 on the machine, so all parts come out White.
There was white Nylon12 on the machine, so all parts come out White.
Rüdiger
__________
84 GPZ 900R
84 GPZ 900R
86 GPZ 900R
88 GPZ 900R
888 SP4
907ie Black
907ie Red
907 evo (project)
998 Matrix
998s FE
V50 Monza
MV Agusta 750 Evo2
ZXR750RR-K
ZXR750RR-M
__________
84 GPZ 900R
84 GPZ 900R
86 GPZ 900R
88 GPZ 900R
888 SP4
907ie Black
907ie Red
907 evo (project)
998 Matrix
998s FE
V50 Monza
MV Agusta 750 Evo2
ZXR750RR-K
ZXR750RR-M
Re: swingarm chain slider
Great news Rudiger. Looking forward to see how they come out.
- Bock900r
- Posts: 153
- Joined: Tue Sep 07, 2010 1:33 am
- model: 907 I.E.
- year: 1991
- Location: Hamburg/Germany Novi/Michigan
Re: swingarm chain slider
Back in the office today, clean out the parts
Is there someone local (USA) I can send some for testing if the fit before I make them again
Is there someone local (USA) I can send some for testing if the fit before I make them again
Rüdiger
__________
84 GPZ 900R
84 GPZ 900R
86 GPZ 900R
88 GPZ 900R
888 SP4
907ie Black
907ie Red
907 evo (project)
998 Matrix
998s FE
V50 Monza
MV Agusta 750 Evo2
ZXR750RR-K
ZXR750RR-M
__________
84 GPZ 900R
84 GPZ 900R
86 GPZ 900R
88 GPZ 900R
888 SP4
907ie Black
907ie Red
907 evo (project)
998 Matrix
998s FE
V50 Monza
MV Agusta 750 Evo2
ZXR750RR-K
ZXR750RR-M
- higgy
- paso grand pooh-bah
- Posts: 3334
- Joined: Tue Jul 29, 2008 9:50 pm
- model: 907 I.E.
- year: 1992
- Location: Hilltown,Pennsylvania
- Contact:
Re: swingarm chain slider
I'm in Pa, pm sent
Ducati,making mechanics out of riders since 1946
There's no problem so bad that a little fixing can't make it worse! : )
If it ain't broke keep fixin it till it is
88 750
90 906
92 907ie
There's no problem so bad that a little fixing can't make it worse! : )
If it ain't broke keep fixin it till it is
88 750
90 906
92 907ie